Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith
Large Image
We're sorry, this item is not available.
We're sorry, this item is not available.
'55-'56 Chevy Tilt & Shift Steering Column
Click image to enlarge Click image to enlarge
No video at this time.
 
Now you can update your 1955-57 Chevy car with a tilt wheel column.  Available in paintable or chrome finish, and with or without a shifter.  They accept a 1" DD u-joint or coupler and '69-'94 GM steering wheels or adapters.  Keep in mind that a tilt column will move the steering wheel back about 2".

'55-'57 Steering Column Instruction Sheet (pdf)
If you are using a stock steering box you will have to modify it to accept a 3/4" DD.
Email this page
Close [x]
You can send this product by email to a friend!
Enter the required information in the spaces provided below. They will receive an Email with the picture of this product and a link back to our site.
Your Name:
Your Email:
Friends Name:
Friends Email:
Our Techs also Suggest the Following:
Sweet Mfg Steering U-Joint, 1 Inch DD, 3/4 Round, IDIDIT/Flaming River Column
Price:
$74.99
EA
In Stock
Item #:
Item Details:
GM columns measure slightly less than 1" while Ididit and Flaming River columns measure a true 1".
Sweet Mfg Steering U-Joint, 1 Inch DD to 3/4 DD, IDIDIT/Flaming River Column
Price:
$79.99
EA
In Stock
Item #:
Item Details:
GM columns measure slightly less than 1" while Ididit and Flaming River columns measure a true 1".
You May Also Be Interested In...
  • Price: $649.99
    More Info
    Ididit 1140550010 1955-56 Chevy Tilt & Shift Steering Column, Plain
    x
    							                        

    Make your 1955-1956 Chevy more comfortable to drive by installing a new Ididit steering column. These tilt columns with shift move the steering wheel back 2" while the non-tilt leaves it in the stock location.

    Uses the common 1969 and up GM wheel adapters and 3-7/8" wiring plug. Listed below are wiring adapters for the stock harness along with a floor mount. Column uses 3/4"-36 spline U-joints. When using the original steering box, the input shaft will need to be cut and modified into a 3/4" DD.

    446-1455 Instructions (PDF)


     

  • Price: $35.99
    More Info
    American Autowire 35780 1956 Chevy Steering Wiring Harness Adapter
    x
    							                        

    This wiring adapter is designed for the stock o/e harness to adapt to an Ididit steering column.  These adapters work with 1956 Chevrolet passenger cars.

    • Stock o/e harness to an Ididit steering column
    • Chevrolet Passenger 1956
    • For 1969-74 GM column to stock dash

    Note: Adapts horn, directionals, hazard flasher to stock dash

     

  • Price: $35.99
    More Info
    American Autowire 35775 Chevy Steering Column Wiring Harness Adapter
    x
    							                        

    These wiring adapters for the stock o/e harness are designed to adapt to an Ididit steering column.  They work with 1955 Chevrolet passenger cars and 1969-74 GM steering columns to stock dash.

    • 1955 Chevrolet Passenger
    • For 1969-74 GM column to stock dash
    • Adapt to an Ididit steering column

    Note: Adapts horn, directionals, hazard flasher to stock dash

     

  • (2 Ratings)
    Price: $15.99
    More Info
    Ididit 2401400010 1955-57 Column Floor Mount
    x
    							                        

    Uses the two original holes in the floor to mount the bracket. The clamp secures the bracket to the column.

    This floor mount is strongly recommended with all Tri-Five Installations.

  • (2 Ratings)
    Price: $99.99
    More Info
    Steering Rag Joint, 3/4 Inch-30 Spline x 1 Inch DD
    x
    							                        

    These rage joints make it easier to put an Ididit column in your '55-'57 Chevy car when using an aftermarket steering box. 

    Steering U-Joints and Couplers Application Chart (GIF)

    Steering Box/Rack/Spline Chart (Link)

    Spline Size (Link)