5 Inch Round Outside Mirrors
Click image to enlarge
Q & A
What's in the Box
Our 5" round outside mirrors are designed for open cars such as T-buckets or early Ford roadsters. Mirror mounts to windshield frame with a 7/8" round outside diameter using the attached clamp.
Available in plain brass, chrome, or stainless steel.
You may also be interested in:
Brass Windwing MirrorMore Info
Universal Round Outside Rear View Mirror, StainlessMore Info
1932 Ford Open Car Outside MirrorMore Info
Swan Neck MirrorMore Info
These nifty 3-1/2" diameter mirrors clip to your wind wing glass. They work great as a secondary blind-spot mirror, or as an alternative to drilling into your body for a stud mount mirror.
Universal flat face mirror clamps to door edge. Has a 4" diameter with a 4-1/2" arm. This mirror is designed for clamping on a door edge or similar component up to 1/8” thick. The mirror head is reversible for use on left or right side.
- Universal application
- 4" diameter
- 4-1/2" arm
- 5-1/2" (from where it bolts to the vehicle to the center of the mount at the end of the arm)
- Clamps to door edge
- Stainless steel mirror face housing with chrome plated cast arm and base
- Hardware included
These stainless steel outside rearview mirrors are for 1932 Ford open cars (Roadster, Phaeton & convertibles). All mirrors are a stud mount design and have a 4" O.D. mirror.
Our chrome plated bolt-on Swan Neck is a sleek addition to any street rod. The mirror measures 4" O.D. and includes a rubber mounting pad to protect your paint. Choose Left hand (driver side) or Right hand (passenger side).
- Mirror Diameter: 4"
- Arm Length: 5-1/2"
- Base of Mirror: 2.25" x 1.25"
- Mount Stud: 5/16"-18 thread with nut/washer
- Mount Stud Length: 3/4"
- Also includes a 2nd alignment stud which is 10-32 x 3/4" long
- Second stud prevents mirror base from rotating without excessive over tightening
NOTE: The first photo is the left hand mirror shown from the back. The second photo is the right hand mirror shown from the front (mirror side).