5/8 Inch or 16mm to AN6 Banjo Fitting for Power Steering Pump
Click image to enlarge
Q & A
What's in the Box
Zinc-plated steel banjo bolt assembly for the pressure connection (outlet) to the pump.
Fitting 617-4830 fits our:
- P/S pump # 91032922-GM
- P/S pump # 91032908-BLK
- P/S pump # 91032908-CHR
WARNING: Fitting is designed to accept an AN-6 stainless steel braided wire high-pressure hose.
You may also be interested in:
-6 AN O-Ring Fittings for 1982-88 T-Bird Power Rack & PinionMore Info
Gotta Show 131101 Mustang/T-Bird Rack & Pinion Power Steering Hose KitMore Info
Aluminum Power Steering Pumps w/ ReservoirMore Info
Tuff Stuff GM Saginaw Power Steering Pump with ReservoirMore Info
14mm to Male AN6 Banjo Bolt Fitting for Power Steering PumpMore Info
Power Steering Fitting, -6 AN to 1/2 Inch-20 O-RingMore Info
Aeroquip FCC0603 -6 AN TFE Braided Hi Pressure Hose 11/32 Inch ID 3 FtMore Info
Aeroquip FBM1103 Straight High Pressure -6 AN TFE Hose EndMore Info
Aeroquip FBM1122 90 Degree High Pressure -6 AN TFE Hose EndMore Info
These fittings are for our 910-34340-POW '82-'88 Thunderbird power steering rack only. Pressure fitting is 14mm O-ring to -6AN. Return fitting is 16mm O-ring to -6 AN.
These stainless steel braided power steering hose kits will connect 1984-88 T-Bird and 1979-93 Mustang racks to most Ford or GM style internal reservoir power steering pumps. The hoses provide a custom look without the need to buy any additional parts. This kit is designed for drivers side pumps and may require hoses to be trimmed to length.
The kit includes:
- (2) 24" stainless steel braided hoses with 90° ends installed (rack end)
- (1) Banjo bolt assembly for the pressure connection to the pump with 5/8" or 16mm threads
- (1) Custom clamp cover for the return hose which connects to a hose nipple on the pump
- Rack fittings in this kit are one each, 16mm or 5/8"-18, and one each, 14mm or 9/16"-18
617-4835 Instructions (PDF)
We offer these brand new lightweight aluminum power steering pumps with a reservoir. Available in either Ford (low flow) or GM (high flow) settings.
- Ford - low flow for Mustang II power rack & pinion and Ford power steering
- GM - high flow for T-Bird power rack & pinion and GM power steering
* AN 6 pressure outlet
* AN 6 return inlet
* 16mm 1.5 pressure outlet
* Hose barb return inlet
Use this Polished V-Belt Pulley sold separately.
These Saginaw power steering pumps from Tuff Stuff come with a new reservoir, billet cap, chrome hardware and new dipstick. Desirable early style 1965-79 pump with threaded and keyed shaft for easy pulley installation. Available in powder coated black or chrome finish. Hoses are available from most local parts stores.
Pump has a 3/8" hose barb for return line and a female 5/8"-18 inverted flare fitting for the high pressure outlet. Pulley not included.
- Saginaw power steering pump with a new reservoir, billet cap, chrome hardware and new dipstick
- Powder coated black or chrome
- Keyed shaft for easy pulley intallation
- Pulleys available in plain, polished, and chrome
- 6" diameter pulleys not included
Works well with small block Chevy engine brackets 916-67920 or 913-32902.
These power steering adapter fittings are designed to simplify the hose connection on your power steering lines. They are made from quality material and are designed to withstand even the harshest environments. The adapter fittings are the perfect solution for adding new lines or for those tight-fit areas where normal, straight fittings won't fit.
Banjo Bolt Fitting for Power Steering Pump
- 14mm to Male AN6
- Zinc-plated steel assembly
- For the pressure connection (outlet) to the pump.
- 90 Degree
- Male Threads
These steel fittings have a straight thread with o-ring on one side and the common AN6 on the other. Common to Ford rack and pinion and others.
Manufactured by Eaton with a Teflon® inner liner to provide you with unsurpassed levels of performance and reliability for your tough performance applications. Provides maximum performance by combining the low friction properties of the Teflon® inner liner with the antiburst strength from a stainless steel overbraiding. Stainless overbraid won't corrode or discolor. This hose is ideal for high temperature, high pressure, and offers wide range of fluid compatibility.
The maximum operating pressure is 3,000psi. Teperature range is -100 degrees to 450 degrees F
Use with either crimp or reusable fittings.
Applications include off-road brake, transmission, clutch, gauge, nitrous oxide, power steering, hydraulic and air conditioning.
See part # 6172013 for correct fittings to use with this hose.
Designed for high pressure brake and power steering systems. When assembled, you have a quality hose assembly that can handle up to 3000 psi.
Works only with TFE stainless braided high pressure hose.
High alloy steel for high pressure brake and power steering systems. When assembled, you have a quality hose assembly that can handle up to 3000 psi.
Works only with TFE Stainless Braided
High Pressure Hose.