5-5/8 Inch Spline Joints

Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. This steering universal joint is the highest quality for racing or street use. Full compliment bearings Forged Vanadium steel yokes and u-joint Highest quality for racing or street Features needle bearing u-joints 5/8"-36 Spline Steering U-Joints and Couplers Application Chart (GIF) Steering Box/Rack/Spline Chart (Link) Spline Size (Link) Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns ...

Sometimes you need just a little bit more clearance than a standard steering u-joint can give you. Our double u-joints allow up to 70 degrees of angle or 1" of offset for just those occasions. These steering universal joints are made of forged vanadium steel and real needle bearing joints.  5-5/8" overall length. Spline Size (Link) Steering Box/Rack/Spline Chart (Link) Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

These splined U-joints feature a set screw & lock-nut.  Maximum operation angle of this steering universal joint is 32°. 5/8"-36 spline x 3/4" round weld-on Greased needle bearing with Teflon seal Forged 1045 steel Broached spline for better fit Heat-treated forgings 1-1/8" O.D. x 3-3/4" length  

Sometimes you need just a little bit more clearance than a standard steering u-joint can give you. Our double u-joints allow up to 70 degrees of angle or 1" of offset for just those occasions. These steering universal joints are made of forged vanadium steel and real needle bearing joints.  5-5/8" overall length. Spline Size (Link) Steering Box/Rack/Spline Chart (Link) Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.

Sometimes you need just a little bit more clearance than a standard steering u-joint can give you. Our double u-joints allow up to 70 degrees of angle or 1" of offset for just those occasions. These steering universal joints are made of forged vanadium steel and real needle bearing joints.  5-5/8" overall length. Spline Size (Link) Steering Box/Rack/Spline Chart (Link) Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1".  DO NOT interchange these u-joints.  

Sometimes you need just a little bit more clearance than a standard steering u-joint can give you. Our double u-joints allow up to 70 degrees of angle or 1" of offset for just those occasions. These steering universal joints are made of forged vanadium steel and real needle bearing joints.  5-5/8" overall length. Spline Size (Link) Steering Box/Rack/Spline Chart (Link)  

Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. These steering universal joints are 5/8"-36 spline and feature forged Vanadium steel yokes. Full compliment bearings Forged Vanadium steel yokes and u-joint Highest quality for racing or street Features needle bearing u-joints 5/8"-36 Spline Steering U-Joints and Couplers Application Chart (GIF) Steering Box/Rack/Spline Chart (Link) Spline Size (Link) Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River ...

Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. These steering universal joints feature a double D end to make use of the double D shaft.Full compliment bearingsForged Vanadium steel yokes and u-jointHighest quality for racing or streetFeatures needle bearing u-joints5/8"-36 SplineSteering U-Joints and Couplers Application Chart (GIF) Steering Box/Rack/Spline Chart (Link)Spline Size (Link) Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns ...

Sometimes you need just a little bit more clearance than a standard steering u-joint can give you. Our double u-joints allow up to 70 degrees of angle or 1" of offset for just those occasions. Made of forged vanadium steel and real needle bearing joints.  5-5/8" overall length. Spline Size (Link)     This u-joint is garage sale priced because it is different than what we currently offer.     NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. These steering universal joints feature full compliment bearings and a 5/8"-36 spline.Full compliment bearingsForged Vanadium steel yokes and u-jointHighest quality for racing or streetFeatures needle bearing u-joints5/8"-36 SplineSteering U-Joints and Couplers Application Chart (GIF) Steering Box/Rack/Spline Chart (Link)Spline Size (Link) Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns ...

Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. This steering universal joint is the highest quality for racing or street use.Full compliment bearingsForged Vanadium steel yokes and u-jointHighest quality for racing or streetFeatures needle bearing u-joints5/8"-36 SplineSteering U-Joints and Couplers Application Chart (GIF) Steering Box/Rack/Spline Chart (Link)Spline Size (Link) Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a ...

Sometimes you need just a little bit more clearance than a standard steering u-joint can give you. Our double u-joints allow up to 70 degrees of angle or 1" of offset for just those occasions. These steering universal joints are made of forged vanadium steel and real needle bearing joints.  5-5/8" overall length. Overall length is 5-1/2” O.D. at ends is 1.12” O.D. in the middle is 1.476” O.D. at caps is 1.350” O.D. at cap retainer screws is 1.545” Length of center section is 2-3/4” Spline Size (Link) Steering ...

These polished stainless steel U-joints look great and use a pinch bolt on each end for easy installation. The OD is 1.650" (41.90mm)  3-3/4" in total length This U-Joints size is 5/8"-36 count spline by 3/4" DD Shaft. It is the common size for the Vega style steering box. Steering U-Joints and Couplers Application Chart  (GIF) Steering Box/Rack/Spline Chart  (Link) Spline Size  (Link) NOTE:   These u-joints contain a safety feature that requires the DD steering shaft to be notched for pinch bolt clearance. Once notched, the pinch bolt MUST be ...

Longer slip yokes help compensate for extreme travel rear suspension set-ups or driveshaft lengths slightly shorter than needed. Yoke is grooved for "external" snap rings to retain U-joint cups. Fits over the output shaft of the following transmissions:  Common GM/Saginaw 3 & 4 speed transmissions with a 1-3/16" x 27 spline output shaft Powerglide, T-350, 700R-4, 200R-4, and 4L60 automatic transmissions Muncie M20/M21 and Borg Warner T-5, T-10 & T-56 27-spline manual transmissions High quality, heat treated forged steel replacement U-joints. The endcaps on the 3-5/8" width side have ...

Don't jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. These steering universal joints are 5/8"-36 spline and feature forged Vanadium steel yokes.Full compliment bearingsForged Vanadium steel yokes and u-jointHighest quality for racing or streetFeatures needle bearing u-joints5/8"-36 SplineSteering U-Joints and Couplers Application Chart (GIF) Steering Box/Rack/Spline Chart (Link)Spline Size (Link) Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns ...

Longer slip yokes help compensate for extreme travel rear suspension set-ups or driveshaft lengths slightly shorter than needed. Yoke is grooved for "external" snap rings to retain U-joint cups. Works with 1310 series U-joints. Fits over the output shaft of the following transmissions:  Common GM/Saginaw 3 & 4 speed transmissions with a 1-3/16" x 27 spline output shaft Powerglide, T-350, 700R-4, 200R-4, and 4L60 automatic transmissions Muncie M20/M21 and Borg Warner T-5, T-10 & T-56 27-spline manual transmissions

Longer slip yokes help compensate for extreme travel rear suspension set-ups or driveshaft lengths slightly shorter than needed. Yoke is grooved for "external" snap rings to retain U-joint cups. Works with 1310 series U-joints. Fits over the output shaft of the following transmissions:  Common GM/Saginaw 3 & 4 speed transmissions with a 1-3/16" x 27 spline output shaft Powerglide, T-350, 700R-4, 200R-4, and 4L60 automatic transmissions Muncie M20/M21 and Borg Warner T-5, T-10 & T-56 27-spline manual transmissions This yoke is garage sale priced because it has some surface rust.   NO ...

Longer slip yokes help compensate for extreme travel rear suspension set-ups or driveshaft lengths slightly shorter than needed. Yoke is grooved for "external" snap rings to retain U-joint cups. Works with 1310 series U-joints. Fits over the output shaft of the following transmissions:  Common GM/Saginaw 3 & 4 speed transmissions with a 1-3/16" x 27 spline output shaft Powerglide, T-350, 700R-4, 200R-4, and 4L60 automatic transmissions Muncie M20/M21 and Borg Warner T-5, T-10 & T-56 27-spline manual transmissions This yoke is garage sale priced because it has some surface rust from being ...