Lets you adapt most Holley 4 bbl. carbs to a Quadra-Jet intake manifold (and vice-versa). Includes a Quadraget base gasket, a Holley base gasket, and mounting hardware. Adapter is .7255" thick.
Allows you to use common 5-1/8" 4 bbl. air cleaner on your 2G and 2GC Rochester 2 bbl. carburetor. Billet aluminum.
This non-progressive linkage kit is for our Demon 98 dual carb to 4 bbl manifold combo 925-100.Demon 98 Multi-Carb Linkage Kit Instructions (pdf)
Allows you to adapt a Rochester 2 bbl. or Holley 2300 onto a 4 bbl manifold and adjust it forward or back on manifold.
Lets you adapt most Holley and Carter/Edelbrock AFB style 4 bbl. carbs to a Quadra-Jet intake manifold. Adapter is 1" thick.
Lets you adapt most Holley 4 bbl. carbs to a Quadra-Jet intakemanifold (and vice-versa). Includes a Quadraget base gasket a Holley base gasket and mounting hardware. Adapter is .7255" thick.
Adapts a Holley, Edelbrock, or Carter AFB to the early 50's WCFB bolt pattern. Designed for use with the Offy Flathead 4-barrel intake manifold and Holley 390 CFM 4-BBL. This carb adapter includes gaskets for both top and bottom sides as well as mounting hardware.
What we have here is an adapter that allows you to put three two barrel carbs on a four barrel intake. Accepts three small base Rochester four bolt 2-barrel carburetors.
This kit allows you to put three Speedway 9 Super 7® carbs on your standard 4 bbl intake manifold. It includes three carbs, the adapter, air cleaners, progressive linkage kit, fuel block, fittings and red fuel line. Assembly required. Note: Kit will NOT work with HEI distributors due to clearance issues. This system must be used in conjunction with a small diameter based distributor. 4 barrel bolt pattern is 5-1/8” side to side and 5-5/8” front to rear 2 barrel bolt pattern is 3-1/4” side to side by 1-7/8” front to rear ...
This kit allows you to put three Speedway 9 Super 7® carbs on your standard 4 bbl intake manifold. It includes three carbs, the adapter, air cleaners, progressive linkage kit, fuel block, fittings and red fuel line. Assembly required. Note: Kit will NOT work with HEI distributors due to clearance issues. This system must be used in conjunction with a small diameter based distributor. 4 barrel bolt pattern is 5-1/8” side to side and 5-5/8” front to rear 2 barrel bolt pattern is 3-1/4” side to side by 1-7/8” front to ...
Adapts a Holley Edelbrock or Carter AFB to the early 50's WCFB bolt pattern. Designed for use with the Offy Flathead 4-barrel intake manifold and Holley 390 CFM 4-BBL. This carb adapter includes gaskets for both top and bottom sides as well as mounting hardware.