Products to Compare (max of 3)
Compare These Parts
America's Oldest Speed Shop ® Talk to the Experts. Call 800.979.0122, 7am-10pm, everyday.
Help Center
Help Center
Help Center

U.S.Order Line:


(CST) 7am - 10pm

Race and Rod Tech Support

Mon-Fri 8am - 5pm

Canadian Order Line:


International Order Line:

Since 1952

JAZ Products 275-632-06 32 Gallon Teardrop Fuel Cell

SAME DAY SHIPPING! Most orders ship within 24 hours.

Material Type:
Sold in Quantity:
Powder Coated
Fuel Cell Cap Style:
Outlet Fitting:
-10 AN
MFG. Part #:
Return Fitting:
-8 AN
Safety Foam Included:
Overall Height:
Overall Width:
Overall Length:
JAZ Products 275-632-06 32 Gallon Teardrop Fuel Cell

Click image to enlarge



Q & A

What's in the Box

This fuel cell is design to fit chassis that use the common teardrop design. The red powder coated steel can has an AN10 pickup, AN8 vent/tip-over valve and AN8 return fitting. It is 24-3/4" eide and has a steel fill cap and IMCA approved flapper valve. Mounting straps sold separately.

Item Details

24 3/4" wide, 23" front to back excluding the lips, minimum height 6" and a max height of 20".

Customer Reviews

This product has no reviews.

Product Q&A

0 questions : 0 answers

No questions have been asked.

You may also be interested in:

Jaz-Speedway Fuel Cell Flapper Valve
(Part #458315)

This flapper valve or rollover valve, installs in the fuel cell and is retained by the bolts used to secure the filler cap flange to the cell.

When fueling the cell, the rubber flap opens. If the cell should become inverted, the rubber flap closes to seal off the filler opening so that fuel cannot leak out.

A must have safety item! 

IMCA approved.

458-315 Instructions (pdf)

JAZ Products 345-250-03 45 Degree Fast-Fill Fuel Cell Valve
(Part #458357)

Cast aluminum fill valve mounts on fuel cell. Has spring loaded flapper valve. Mounts with twelve bolts on a 5" circle. 6-1/2" outside diameter. 2-1/2" hose end.

Requires split nut ring 458-358 to install.

Jaz-Speedway Flapper Only
(Part #458316)
                        A must have safety item! Required by most sanctioning bodies. IMCA approved.  
Fuel Safe Fuel Level Indicator Stick
(Part #91011782)

Fuel level indicator stick ideal for checking fuel level in all types of fuel tanks from sprint tanks to off road racing cells. Unique design allows you to insert fuel level stick into any fuel tank, fuel enters the clear fill tube via a one way check valve in the bottom of the stick. Withdraw the stick from the tank and check your fuel level against pre-set fuel level markings on the stick. Once you've determined the fuel level in the tank, simply dump the clean gas back in the tank.

  • No Mess!
  • No Spill!
  • Works in low light conditions!
  • 36" length Comes complete with adjustable fuel level markers that can be calibrated to your system
  • Endorsed by 3 time World of Outlaws Sprint Car Champion Sammy Swindell
Fuel Safe 28 Gallon Dirt Late Model / Dirt Modified Racing Fuel Cell
(Part #91053447)
                        Fuel Safe’s dirt late model / dirt modified fuel cell is  engineered to win! It provides racers with the ultimate combination  of safety, performance, and affordability.  The 28 gallon cell features FIA-FT3 certified high strength Enduro®  molded bladder, housed in a 20 gauge steel container with a black powder  coated finish that conforms to all major sanctioning body’s rules book.   A lightweight aluminum fill plate with a billet flush fill cap  provides superior roll over protection and creates a low profile design  that allows racers to adjust the location of the cell in the chassis for  peak performance.  The side mounted fuel outlet provides for improved  plumbing layout and efficient fuel delivery.  The forward bias sump  design ensures the fuel load is carried low and forward in the chassis  and that fuel is always available under acceleration. 
  • Super tough FIA-FT3 certified Enduro® bladder
  • Powder coated (black) 20 gauge steel container
  • Low profile light-weight aluminum fill plate with:
  • Billet aluminum flush cap
  • -6 AN rollover vent valve
  • -8 AN fuel return
  • Dipstick
  • -10 AN pickup with side outlet
  • 2 year limited warranty
Wehrs Machine Fuel Tank Breather
(Part #910452530)

Now you can let your fuel tank breath. No need for line, this just attaches right to the cell and has built in anti-slosh flap.

  • Fuel Tank Breather
  • Anti-Slosh Flap
  • Choose -6AN or -8AN attachment size
  • Sold Individually
JAZ Products 400-632-03 Straps for 458-275 Fuel Cell
(Part #4581632)
Straps for 458-275 Fuel Cell