Swedged aluminum steering panhard and radius rods that are 3/4" x .120 round 6061-T6 and tapped R/H & L/H for 3/8"-24 thread rod ends. Stocked in lengths from 5" to 31" in 1/2" increments.
These 5140 forged steel claimer I-beam connecting rods for small block Chevys are heat treated, shot peened and magnafluxed for maximum durability. They are suitable for engines producing up to 500 HP. Features heavy duty 3/8" cap screws. Torque Cap Screws to 50 ft./lbs. Crank Pin: 2.100" Wrist Pin: .927" Big End Width: .940" Set of 8.
Scat Pro Stock forged 4340 I-beam Small Block Ford journal connecting rod set complete with ARP 8740 3/8" cap screw bolts. Tough I-beam style rod set that uses press pin design for rules that require stock style rod. Bushed pin Rod Length: 5.4" Crankpin: 2.123" Wristpin: .927" Bewidth: .830"
Replacement aluminum rod for shifters. Available 16" & 24" lengths. Threaded 3/8-24 RH and 3/8-24 RH. Heims sold separately. These shifter rods are garage sale priced because they are different than what we currently offer. NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS
Premium Scat forged Q-Lite H-beam rods with ARP 2000 3/8" cap screws . Lightest H-beam design available without sacrificing strength Special doweled cap
Our 5140 Steel Claimer I-Beam connecting rods for Small Block Chevys are heat treated, shot peened and magnafluxed for maximum durability. They are suitable for engines producing up to 500 HP. Features heavy duty 3/8" cap screws (no longer comes with bolts). Available with bushed pin. Set of 8. These rods are garage sale priced because a few of them are scratched on the crank shaft end. NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS
These 5140 forged steel claimer I-beam connecting rods for small block Chevys are heat treated, shot peened and magnafluxed for maximum durability. They are suitable for engines producing up to 500 HP. Features heavy duty 3/8" cap screws. Set of 8.
Stainless steel (unpolished) radius rods for rear suspensions. Made from heavy wall tubing and includes "S" stiffener which gives the arm greater strength to withstand hard acceleration. All holes are tapped 5/8" RH fine thread. Use 5-3/4" bracket for clevis mount center bolt spacing.
Polihsed stainless steel radius rods for rear suspensions. Made from heavy wall tubing and includes "S" stiffener which gives the arm greater strength to withstand hard acceleration. All holes are tapped 5/8" RH fine thread. Use 5-3/4" bracket for clevis mount center bolt spacing.
Chrome plated radius rods for rear suspensions. Made from DOM steel tubing and includes "S" stiffener which gives the arm greater strength to withstand hard acceleration. All holes are tapped 5/8" RH fine thread. Use 5-3/4" bracket for clevis mount center bolt spacing.
Steel radius rods for rear suspensions. Made from DOM steel tubing and includes "S" stiffener (requires welding) which gives the arm greater strength to withstand hard acceleration. Chrome and stainless units have the stiffener welded in place. All holes are tapped 5/8" RH fine thread. Use 5-3/4" bracket for clevis mount center bolt spacing.
Polihsed stainless steelradius rods for rear suspensions.Made fromheavy walltubing and includes "S"stiffener whichgives the arm greater strength to withstand hard acceleration. Allholes are tapped5/8" RH fine thread.Use 5-3/4" bracket for clevis mount center bolt spacing.
Steel radius rods for rear suspensions.Made from DOM steel tubing and includes "S"stiffener (requires welding) whichgives the arm greater strength to withstand hard acceleration.Chrome and stainless units have the stiffener welded in place. Allholes are tapped5/8" RH fine thread.Use 5-3/4" bracket for clevis mount center bolt spacing.
AFCO shifter rods for 2-lever shifter.Each rod uses two 3/8" RHM rod ends 42 Inch Long2 lever standard: (1) 16" & (1) 24" rod
AFCO shifter rods for 2-lever shifter.Each rod uses two 3/8" RHM rod ends 16 Inch Long2 lever standard: (1) 16" & (1) 24" rod
AFCO shifter rods for 2-lever shifter.Each rod uses two 3/8" RHM rod ends 36 Inch Long2 lever standard: (1) 16" & (1) 24" rod
AFCO shifter rods for 2-lever shifter.Each rod uses two 3/8" RHM rod ends 20 Inch Long2 lever standard: (1) 16" & (1) 24" rod
You know there are times you need one of these even if you don't know what to call it. All have 3/8"-24 RH threads. 6 Inch Long Hex 8 5/8" overall.
AFCO shifter rods for 2-lever shifter. Each rod uses two 3/8" RHM rod ends 30 Inch Long 2 lever standard: (1) 16" & (1) 24" rod
AFCO shifter rods for 2-lever shifter. Each rod uses two 3/8" RHM rod ends 42 Inch Long 2 lever standard: (1) 16" & (1) 24" rod
AFCO shifter rods for 2-lever shifter. Each rod uses two 3/8" RHM rod ends 24 Inch Long 2 lever standard: (1) 16" & (1) 24" rod