No items in Shopping Cart
Collector gaskets available in several sizes.
Kit includes 2 extruded aluminum lowering blocks complete withfour 1/2"U-bolts and hardware. Blocks are 2-1/2" wide x5" long. U-bolts fit 3" diameter axle housings and are 10" long.
Chrome plated steel 4 barrel (5-1/8" neck) air cleaner. 14" diameter and 2"tall paper filter element. There is no "drop" to the base of this air cleaner, meaning the bottom of the cleaner is at the same height as the top of the carb.
Beautifully polished cast aluminum steering columndrop for early Ford steering columns (1-1/2" diameter tube) with column shift. Can be reworked to fit other makes of cars.
A hinge at the upper end permits an infinite choice of mounting angles. These are for stockGM van steering columns (2" diameter). Polished aluminum construction.
A Chrome Plastic Hubcap - 2" Diameter for your pedal car.
Pro Steel small body shocks have a non-adjustable zinc plated gas cell shock.Carbon steel shaft is chromed and centerless ground for longer seal life.Features a unique 1/2" removable bearing mount. Shocks are sold less bearing ends. OK for use with coil overs. 1.63 diameter.
Vented stock 9-1/4" diameter rotors for 1974-1980 Mustang II, Pinto, or Bobcat spindles (or Speedway brake kits using '49-'54 Chevy spindles).Rotorsare new,not plugged or re-drilled. Has a 5 on 4-1/2" bolt pattern withcorresponding 1/2" diameter fine threadwheel studs.
14" diameter with 3" high filter to fit 4 barrel carbs with 5-1/8" diameter necks. Offers maximum air flow with only 2-1/2" stack height above the carburetor lip.Dyno tests report that small blocks using Moroso air cleaners can produce 10 more horsepower than with other air cleaners.
RAM Clutches for 'stock clutch rule' classes give you unmatched performance and durability.These 10.5 inch diameter assemblies utilize eithera billet aluminum pressure ring with a riveted steel heat shield, nodulariron pressure ring, or a billet steel ring; allof which provide a durable mating surface for the clutch disc. A 3000 lb. pressure spring provides increased static pressure over stock clutches.
Installation kit includes your choice of 4", 8" or 12" length of fuel resistant 1-1/2" diameter hose and two clamps.
7" diameter for 1/2" axle
These weld-on leaf spring pads fit 3" diameter axle tubes. Works with all 2-1/2" wide leaf springs.
2" outside diameter, 14" O.D. nipples - works with any radiator. Stops loss of coolant and prevents pulling air into system when cooling off. Polished stainless steel expansion reservoir tank with screw-off cap.
Speedwayleaf sping axle U-bolts are heat treated and zinc plated to ensure long life and durability.All bolts are 1/2" diameter. Fits 3" diameter axle tubes.
Chrome plated steel 4 barrel air cleaner. 10" diameter and 2"tall filter element.
Speedway leaf sping axle U-bolts are heat treated and zinc plated to ensure long life and durability. All bolts are 1/2" diameter. Fits 3" diameter axle tubes.
These LED bulbs put out the light you're after, but don't get hot like normal bulbs. 1" diameter, red or amber, and 1156. 1156 have the pins straight across and a single contact.
Tested by our troops in Iraq, these headlights have proven to be efficient, rugged and bright. They are the common 7" diameter and will fit most applications that use the 6014 style bulb. The lens does extend out approximately 1" farther than the original so check for clearance issues. These are the latest technology in headlights and is that cure for the 'I can't see at night' blues.
60409010-DISH-BLKSteering Wheel Style3 BoltOutside Diameter15.000"Dish2.25 inchColorBlackMaterial TypeAluminumFinishNaturalSold in QuantityEachNotesNo horn button. Grip is .875" diameter.60409010-DISH-BLUSteering Wheel Style3 BoltOutside Diameter15.000"Dish2.25 inchColorBlueMaterial TypeAluminumFinishNaturalSold in QuantityEachNotesNo horn button. Grip is .875" diameter.60409010-DISH-PRPSteering Wheel Style3 BoltOutside Diameter15.000"Dish2.25 inchColorPurpleMaterial TypeAluminumFinishNaturalSold in QuantityEachNotesNo horn button. Grip is .875" diameter.60409010-DISH-REDSteering Wheel ...
Steel brackets for mounting 8" diameter tanks. Each has 4-3/4" bolt mount centers and is 6" wide overall at the base.
If you run a high compression or blower motor in your hot rod, you will need this tank. The big 3" diameter oversize tank gives you the added capacity needed. Attractive, stainless steel construction. Mounting hardware included.
These top mount brake brackets from MPD Racingare machined of aluminum for minimum weight.All brake mounts are designed to bolt on perfectly centered with no spacers.
Beautifully chrome plated. Improves cooling on most cars. Flexible design conforms to almost any diameter fan. Attach to radiator core with nylon zip-ties. Includes mounting hardware.