Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf

Ididit 2802000010 2-1/4 Inch Column Mount Cable Shift Kit

Ididit 2802000010 2-1/4 Inch Column Mount Cable Shift Kit
Ididit 2802000010 2-1/4 Inch Column Mount Cable Shift Kit

Click image to enlarge

Details

Reviews

Q & A

What's in the Box

This is the slickest way to connect your column shifter to your tranny. If you are using the Ididit shorty column, this is a must. Includes column bracket to mount cable to Ididit columns, 6 foot cable and GM tranny brackets.

Application

This will work with a TH200, TH350, TH400, 200-4R, and 700-R4 transmission and an aftermarket or Ididit 2-1/4" o/d column.

You may also be interested in:

Lokar KD-2350HT Hi-Tech TH350 Kickdown Kit
SKU-4912350HT
                        

These Hi-Tech Turbo 350 transmission kickdown kits feature a braided stainless, Teflon lined cable that adapts to any manifold installation (including tunnel ram, blower manifolds and Weber induction systems). 36" long, you-cut-to-fit cable attaches to stainless brackets # 491-4000 or # 491-SRK4000.

491-2350HT Instructions (PDF)

 

Ididit 1130280010 Tilt Wheel Steering Column w/ Shift, 28 Inch, Plain
SKU-4461328D
                        Original equipment steering columns are loaded with unsightly brackets, tabs and switches. These columns are much cleaner in appearance and eliminate the column-mounted key switch. These tilt with automatic transmission shift lever versions feature a 2-1/4" O.D. column tube. 
  • Self-canceling turn signals
  • 4-way flashers
  • Horn circuit
  • Aluminum dress-up kit (billet turn signal knob and handle tilt knob and handle and 4-way flasher button)
  • Plain steel finish

Measures 28" long from steering wheel base to end of the 1" double D shaft. Each has a standard GM 3-7/8" wire harness, 5-position tilt, and accept stock 1969-up GM steering wheels or our custom wheels with an adapter (sold separately).

446-1328D Instructions (PDF)

Ididit 1130300010 Tilt Wheel Steering Column w/ Shift, 30 Inch, Plain
SKU-4461330D
                        Original equipment steering columns are loaded with unsightly brackets, tabs and switches. These columns are much cleaner in appearance and eliminate the column-mounted key switch. These tilt with automatic transmission shift lever versions feature a 2-1/4" O.D. column tube. 
  • Self-canceling turn signals
  • 4-way flashers
  • Horn circuit
  • Aluminum dress-up kit (billet turn signal knob and handle tilt knob and handle and 4-way flasher button)
  • Plain steel finish

Measures 30" long from steering wheel base to end of the 1" double D shaft. Each has a standard GM 3-7/8" wire harness, 5-position tilt, and accept stock 1969-up GM steering wheels or our custom wheels with an adapter (sold separately).

446-1330D Instructions (PDF)

Ididit 1130330010 Tilt Wheel Steering Column w/ Shift, 33 Inch, Plain
SKU-4461333D
                        Original equipment steering columns are loaded with unsightly brackets, tabs and switches. These columns are much cleaner in appearance and eliminate the column-mounted key switch. These tilt with automatic transmission shift lever versions feature a 2-1/4" O.D. column tube. 
  • Self-canceling turn signals
  • 4-way flashers
  • Horn circuit
  • Aluminum dress-up kit (billet turn signal knob and handle tilt knob and handle and 4-way flasher button)
  • Plain steel finish

Measures 33" long from steering wheel base to end of the 1" double D shaft. Each has a standard GM 3-7/8" wire harness, 5-position tilt, and accept stock 1969-up GM steering wheels or our custom wheels with an adapter (sold separately).

446-1333D Instructions (PDF)

Lokar KD-2350U TH350 Kickdown Kit
SKU-4912350U
                        

These Turbo 350 transmission kickdown kits have a stainless bracket that mounts on rear manifold bolts. Designed for 4 barrel carburetors on S/B Chevy engines. Kit includes extender for more versatility in adjusting cable length where needed. For TH350 transmission application.

Note: Cable housing cannot be cut to fit.

Lokar KD-2700HT 700R4 Hi-Tech Kickdown Kit
SKU-4912700HT
                        

These Hi-Tech 700-R4 transmission kickdown kits have a braided stainless, Teflon lined cable, which will adapt to virtually any 700R4 carburetor manifold (including tinnel ram, blower manifolds, and Weber induction systems). 36" long, you-cut-to-fit cable attaches to the stainless bracket # 491-4350 or # 491-SRK4000.

491-2700HT Instructions (PDF)

Lokar KD-2400HT TH400 Hi-Tech Electric Kickdown Kit
SKU-49102400
                        

Lokar's Hi-Tech TH400 Electric Kickdown is cable-operated. Electric switch is housed in a billet aluminum box that mounts with transmission pan bolts.* Kit includes "U-Cut-to-Fit" outer housing in stainless steel. This Turbo 400 kickdown is designed with a specially extruded liner for extended life of the cable, aluminum fittings and stainless steel inner wire and stainless mounting bracket. This design eliminates mounting unsightly electrical switches on carburetor, manifold, or near throttle pedal. Complete installation instructions included in kit.

Can be mounted in a variety of locations within 48" of carburetor.

Lokar KDP-2350HT TH350 Hi-Tech Kickdown Cable Kit, Polished
SKU-49120005
                          

To add more shine to your Turbo 350 engine compartment, try Lokar's "U-Cut-to-Fit" Polished Kickdown Cable which features a stainless steel braided housing. Cables are designed with a specially extruded liner for extended life of the cable – not to be confused with ordinary brake hose. Kickdown features polished aluminum fittings with polished ferrule to eliminate frayed cable ends. TH350 kickdowns are adaptable for all types of manifolds including tunnel ram, blower manifolds and Weber induction systems. Mount our kickdown with our Stainless Steel Carburetor Bracket and Return Springs (sold separately). Complete instructions included in kit.

GM Turbo 350 Hi-Tech Kickdown Cable Installation Instructions (PDF) 

Lokar KD-2350TP GM TH350 Hi-Tech Kickdown Cable Kit, Tuned Port
SKU-49123501
                          

Lokar's "U-Cut-to-Fit" Hi-Tech Turbo 350 Kickdown Cable features a stainless steel braided housing and aluminum fittings with ferrule to eliminate frayed cable ends. these TH350 kickdown cables are designed with a specially extruded liner for extended life of the cable – not to be confused with ordinary brake hose.

Complete instructions included in kit.

GM Hi-Tech Kickdown Cable Installation Instructions (PDF) 

Lokar TCB-40LT4 94-Up LT1-LT4 Throttle Cable & Kickdown Cable Bracket
SKU-49140002
                        

These bracket kits are Lokar's answer to LT1 cable problems. Stainless throttle and kickdown brackets replace factory brackets. Kit includes stainless arm to mount on LT1 throttle body to operate kickdown. Designed to be used with Lokar's Tuned-Port Throttle Cables and Tuned-Port Kickdowns.

  • Stainless throttle and kickdown brackets
  • Replace factory brackets
  • Includes stainless arm to mount on LT1 throttle body to operate kickdown
  • Designed to be used with Lokar's Tuned-Port Throttle Cables and Tuned-Port Kickdowns (see below for part #s)
Lokar ACA-1805 Steering Column Cable Shift Linkage, 2-1/4 Inch Columns
SKU-4911805
                        

Lokar's Column Cable Shift Linkage is the ultimate answer to interference issues when you are unable to use factory or Lokar's hard column linkage. The cable allows you to route the cable around transmission, exhaust, cross-members and brake pedals. Our Exclusive Billet Aluminum Mounting Arm can be used on either side of the column. Specially extruded liner for extended life of the cable, and stainless inner wire measuring 6 feet in length. Ready-to-install hardware and brackets included in kit – no cutting or measuring – simply bolts on.

Note:  For all GM Transmissions except Powerglide. Does not fit Ford or Chrysler Transmissions.

Tech Tip: If you have a direct line of sight from column shift arm to transmission shift arm, we suggest using the adjustable column shift linkage # 491-1800.  To determine column diameter, measure the lower outer column tube.

Lokar KD-2200RHT 2004R Hi-Tech Stainless Steel Kickdown Kit
SKU-4912200
                        

Designed with a specially extruded liner for extended life of the cable – not to be confused with ordinary brake hose. This 2004R Transmission Kickdown features aluminum fittings with ferrule to eliminate frayed cable ends. Kickdowns are adaptable for all types of manifolds including tunnel ram, blower manifolds and Weber induction systems. 

Complete instructions for 200-4R included in kit.

Lokar KD-2350HTBLACK TH350 Hi-Tech Kickdown Kit, Black Housing
SKU-4912350
                        

This Turbo 350 kickdown is designed with a specially extruded liner for extended life of the cable – not to be confused with ordinary brake hose. Kickdown features aluminum fittings with ferrule to eliminate frayed cable ends. Kickdowns are adaptable for all types of manifolds including tunnel ram, blower manifolds and Weber induction systems. 

Complete instructions for TH350 transmission included in kit.

Lokar KD-2400U TH400 Electric Kickdown Kit, Black
SKU-4912400
                        

Electric switch is housed in a billet aluminum box that mounts with transmission pan bolts. Turbo 400 transmission kickdown kit includes "U-Cut-to-Fit" black outer housing. Designed with a specially extruded liner for extended life of the cable, aluminum fittings and stainless steel inner wire and stainless mounting bracket.  This design eliminates mounting unsightly electrical switches on carburetor, manifold, or near throttle pedal.

Complete installation instructions for TH400 included in kit.

Lokar KD-2700TP 700R4 Tuned Port Hi-Tech Kickdown Kit
SKU-4912700
                        

*Fits vehicles using Tuned-Port engines only.

Lokar makes these kits with PTFE-lined cables for extended life. These 700R4 transmission kickdowns feature aluminum fittings and ferrules to eliminate frayed ends.  Adaptable to all types of manifolds including tunnel ram, blower manifolds and multi-carbureted systems.

Lokar XKD-2700HT 700R4 GM Hi-Tech Kickdown Cable Kit, Black
SKU-49102700
                        

Lokar's "U-Cut-to-Fit" Hi-Tech 700R4 Kickdown Cables are available in black stainless steel braided housing. They are designed with a specially extruded liner for extended life of the cable – not to be confused with ordinary brake hose. Kickdown features aluminum fittings with ferrule to eliminate frayed cable ends. Kickdowns are adaptable for all types of manifolds including tunnel ram, blower manifolds and Weber induction systems. Mount these kickdowns with Lokar's stainless steel carburetor bracket and return springs (sold separately). Complete instructions included in kit.

  • GM 700-R4 applications
  • Specially extruded liner for extended life of the cable
  • Aluminum fittings with ferrule to eliminate frayed cable ends
  • Adaptable for all types of manifolds including tunnel ram, blower manifolds and Weber induction systems
  • Complete instructions included in kit

Throttle Body and Carb End Fittings Guide (Link)

49102700 Installation Instructions (PDF) 

Lokar XKD-2350HT GM TH350 Hi-Tech Kickdown Cable Kit, Black
SKU-49103250
                        

Lokar's "U-Cut-to-Fit" Hi-Tech Turbo 350 Kickdown Cables are available in black stainless steel braided housing. They are designed with a specially extruded liner for extended life of the cable – not to be confused with ordinary brake hose. Kickdown features aluminum fittings with ferrule to eliminate frayed cable ends. Kickdowns are adaptable for all types of manifolds including tunnel ram, blower manifolds and Weber induction systems. Mount these kickdowns with Lokar's stainless steel carburetor bracket and return springs (sold separately). Complete instructions included in kit.

  • GM TH-350 applications
  • Specially extruded liner for extended life of the cable
  • Aluminum fittings with ferrule to eliminate frayed cable ends
  • Adaptable for all types of manifolds including tunnel ram, blower manifolds and Weber induction systems
  • Complete instructions included in kit

Throttle Body and Carb End Fittings Guide (Link)

49103250 Installation Instructions (PDF)