McAfee SECURE sites help keep you safe from identity theft, credit card fraud, spyware, spam, viruses and online scams
Phone

800.979.0122

Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

1973-77 GM A-Body Rear Control Arms with Bushings

1973-77 GM A-Body Rear Control Arms with Bushings

Click image to enlarge

Please NOTE the following about this product:

  • This item is sold as a kit.

Details

Reviews

Q & A

What's in the Box

These heavy duty rear control arms are much stronger than stock stamped arms and help control wheel hop. Arms shipped without bushings installed.

These rear control arms do NOT have provisions for the stock sway bar.

Specs

  • Upper Arms: 11-1/4"
  • Lower Arms: 22-3/8"

(Measurements are center to center of the bushings.)

Item Details

Includes Polyurethane Bushings

Customer Reviews

This product has no reviews.

Product Q&A

4 questions : 4 answers

what gauge box steel is used

1 answers
buickpower
September 22, 2013

what gauge box steel is used

Answers

September 23, 2013
Jason
ThE 1973-77 GM A-body upper control arm is made from .083 (14 ga.) wall tube with ¼” brackets. The lower arm is made from 1-1/2” x 2” x .083 (14 ga.) tube. The lower arms in this kit do ((NOT)) have provisions for attaching a factory-style sway bar.

will this kit fit a 1966 chevelle?

1 answers
idaho falls , ID
May 14, 2011

will this kit fit a 1966 chevelle?

Answers

May 20, 2011
John
This kit fits 73-77 GM A bodies such as Chevelle, Monte Carlo, Skylark, etc. There are different lengths for the earlier years and the later years. The length on these are as follows for a application verification: Upper Arms: 11-1/4" Lower Arms: 22-3/8" (Measurements are center to center of the bushings.)

will this kit fit on a 1970 Chevelle

1 answers
Benny rim bender
June 08, 2011

will this kit fit on a 1970 Chevelle

Answers

June 13, 2011
John
These control arms fit 1973-77 GM A body and will not work with the earlier 1968-72 series A body cars.

Are the lower arms set up to mount a factory sway bar and do you carry mounting hardware for the control arms?

1 answers
Bob
Pensacola, FL
September 05, 2011

Are the lower arms set up to mount a factory sway bar and do you carry mounting hardware for the control arms?

Answers

September 08, 2011
John
These rear control arms do NOT have provision for the stock sway bar and currently the mounting bolts are not included. You may want to visit with a local parts store or GM dealer for the necessary bolts and nuts.
Page 1 of 1

You may also be interested in:

1973-77 GM A-Body Rear Control Arms
(Part #91634051)
                        

These heavy duty rear control arms are much stronger than stock stamped arms and help control wheel hop. Can be used with Speedway polyurethane bushings or stock-style bushings such as Moog K-6178.

These rear control arms do NOT have provisions for the stock sway bar.