No items in Shopping Cart
These are Gates brand power steering hose assemblies made to OEM specifications. Pressure line assembly includes rubber sleeve, scuff guard, and bracketry for a stable, perfectly aligned fit.
This kit lets you install a 1969-87 Chevy 2WD power steering box with a 13/16"-36 spline input shaft in your 1947-59 Chevy pickup. Included are the pitman arm, steering arm, drag link, collapsible steering shaft and hardware. Welding required.
These are Gates brand power steering hose assemblies made to OEM specifications.
These are Gates brand power steering hose assemblies made to OEM specifications. (1) .375" Female SAE end(1) .4375" Male Inverted Flare end33.625" length
These are Gates brand power steering hose assemblies made to OEM specifications.Pressure line assembly includes rubber sleeve, scuff guard, and bracketry for a stable, perfectly aligned fit.
1965-1966 Ford Mustang
Back in the daythe steering arms on someChevelle/Malibus were a different length depending on if they were power or manual steering. The manual cars had a longer arm and if you convert them to power steering you still have slow steering. These forged arms are shorter (faster) than manual steering arms.
Thisrack & pinion conversion kit from Unisteerwill give your1968-1972 Chevelle the ease of steering and road feel modern cars have.Precisely engineered to bolt in without sacrificing steering geometry or safety.
Quality Gates brand direct replacements for original '70-'74 Chevrolet Chevelle power steering hoses.
This rack & pinion conversion kit from Unisteerwill give yourfirst-gen Camarothe ease of steering and road feel modern cars have.Each kit is engineered to bolt in without sacrificing steering geometry or safety.
Don't know if you ever thought about this or not, but the steering arms on some cars were a different length depending if they were power or manual steering. The manual cars had a longer arm and if you convert them to power steering you still have slow steering. These forged arms are shorter (faster) than manual steering arms.
Speedway KRC power steering brackets
Single groove aluminum V-belt pulley withSpeedway name on itand gray anodized finish. Has a 6" diameter andpress-fits onto a 0.663" diameter shaft.
Bracket sold separately. Bracket can be welded to the tank, strapped to the tank with hose clamps, or custom-mounted to suit your needs.
This powersteering reservoir tank mounts horizontal, directly on steering gear.Aluminum with cap and fittings.
This adapter kit expands the available applications of our power steering hose kit to cover most power steering rack & pinion and steering box set-ups. Fittings in this kit are 1/2"-20, 9/16"-18, 5/8"-18, and 11/16"-18 and all go to AN6.
These stainless steel braided power steering hose kits allow you to fit them to your 1980-Up GM for a custom look.
Premium power steering hose kit by Billet Specialties.Comes with quality Russell Performance adapters for most common pumps, boxes, and racks. Designed for use with Tru Trac systems with remote reservoir only.
This braided stainless steel line kit gives you the necessary line linking the rack to the remote reservoir canister. Line has an AN 6 female fitting on the end to work with hose kits 617-4835 and 617-4837.
Pump has a 3/8" hose barb for return line and a female 5/8"-18 inverted flare fitting for the high pressure outlet. Pulley not included. Use bracket available below.
These new power steering pumps feature an aluminum housing with an integral reservoir. This lightweight assembly eliminates the additional lines normally required to get from the pump to a remote reservoir. These pumps are fully ported and 100% flow tested.
Reservoir for KRC pump only. Has both AN6 inlet and outlet. KRC optional 8oz. aluminum reservoir tank mounts directly to a KRC power steering pump. Manufactured from 6061 aluminum with fully machined components that are tig-welded by master craftsmen, this tank replaces the -10 inlet fitting on the power steering pump and can eliminate the most common pump problem (inlet hose failure). It will also eliminate a separate reservoir tank mounted to the chassis or firewall, as well as an inlet hose, providing a cleaner layout under the hood and ...
We offer these brand newlightweight aluminumpower steering pumps with a reservoir. Available in either Ford (low flow) or GM (high flow) settings.