Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf

Elgin Industries 4K5196 Upper Inner Control Arm Bushings, Pair

SAME DAY SHIPPING! Order within the next 9 hours 27 minutes and receive same day shipping

Elgin Industries 4K5196 Upper Inner Control Arm Bushings, Pair
Elgin Industries 4K5196 Upper Inner Control Arm Bushings, Pair

Click image to enlarge

Speeday Motors Logo
X
Elgin Industries 4K5196 Upper Inner Control Arm Bushings, Pair

Please NOTE the following about this product:

  • This item is sold as a pair.

Details

Reviews

Q & A

What's in the Box

If you have a good set of control arms and inner shafts you really should change out those 50+ year old bushings.  These are high quality rubber replacements, just like the originals.

910-32358 Upper sold in pairs.  

  • 1965-70 BelAir, Biscayne, Caprice & Impala
  • 1955-57 Chevy
  • Enough for one control arm

You may also be interested in:

Red Line 80402 CV-2 Synthetic Grease
                        

Red Line’s team of chemists formulate fully-synthetic lubricants using only the world’s finest base stocks. At Red Line, it’s not designed to be the cheapest – it’s built to be the best. Red Line only uses superior polyester-based products – resulting in lubricants that are extremely stable at high temperatures.

Synthetic CV-2 grease provides excellent water resistance, low temperature flow, and its very high melting point allows it to be used in high temperature wheel bearings, high angle and conventional CV-joints, chassis lubrication and many industrial applications.

  • Outperforms the best conventional or synthetic greases and lubes
  • Excellent high-temp stability, extreme-pressure protection, and water resistance
  • Used in a variety of applications with operating temps from -100°F to 500°F
  • Strong resistance to oxidation and corrosion, low evaporation and oil separation with a minimum effect on rubber seals
  • Contains an organic moly for chassis lubrication and high temp/high speed industrial equipment
  • Synthetic fluidity allows increases in bearing life up to 200%
  • Contains a red moly compound which is a superior lubricant to black moly disulfide lubricants
Elgin 4K304 Lower Inner Control Arm Bushings, 55-57, 65-70 Chevy
                        

If you have a good set of control arms and inner shafts you really should change out those 50+ year old bushings. These are high quality rubber replacements, just like the originals. Lower sold in a set of four. 

  • 1965-70 Bel Air, Biscayne, Caprice & Impala
  • 1955-57 Chevy
  • Enough for both lower control arms
  • Sold in a set of 4 bushings
Elgin Industries ES350L 1965-1968 Chevy Outer Tie Rod End
                        

We stock these hard to find replacement tie rods that are a must when rebuilding your classic vehicle.  They will give your Chevy passenger car overall better handling and a positive feel while cruising the strip.  These outer tie rod ends feature left hand threads. The inner tie rod ends are right hand thread and the adjuster sleeve makes the adjustment for toe in by rotating clockwise or counter clockwise.

  • Meets or exceeds factory OEM specifications
  • Overall better handling and a positive feel
  • Left Hand Threads
  • 1965-68 Chevy passenger car

 

Elgin Industries 4K6134 Inner Control Arm Bushings, Lower
                        

If you have a good set of control arms and inner shafts you really should change out those 50+ year old bushings.  These are high quality rubber replacements, just like the originals. 

  • 1965-70 BelAir, Biscayne, Caprice & Impala
  • 1955-57 Chevy
1955-70 Chevy Replacement Upper Ball Joint, Fullsize Car
                        

If your car still has ball joints that are riveted in, they are now over 50 years old. These new OEM ball joints feature a metal gusher bearing design that enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability. Greaseable socket design allows new lubricant to flush contaminants from the assembly, reducing corrosion and wear.

These new replacement upper ball joints fit the following chassis:

  • '55-'57 Chevy car upper
  • '58-'64 Chevy car upper
  • '65-'70 Chevy fullsize car upper
  • '53-'82 Corvette upper

Ball Joint Tech Tips - Grease Zerks (PDF)

Ball Joint Tech Tips - Boot Installation (PDF)

Ball Joint Tech Tips - Bearing Failure (PDF)

1958-1970 Chevy Fullsize Lower Ball Joint
                        

Factory replacement lower ball joints for your 1958-70 Chevy fullsize car.