Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith

1964-1972 GM Brake Backing Plates

SAME DAY SHIPPING!

Specs
Centerline of Holes:
4.12
Material Type:
Steel
Sold in Quantity:
Pair
Finish:
Zinc
Inside Diameter:
1.95
Garage Sale:
No
Notes
Lower two bolt holes are .5", upper hole is .625". Center of lower bolt to upper is 5.468".

Share by Email

From
To

Click image to enlarge

X

Please NOTE the following about this product:

  • This item is sold as a pair.

Details

Reviews

Q & A

What's in the Box

Fits most 1964-1972 GM A, F, X Body. You can use the dimensions below with your spindles to know if this will work for your application.
  • Center hole is 1.950 or 1 15/16"
  • Lower two bolts center to center are 4.115 or 4 1/8"
  • Center of either lower bolt hole to center of upper bolt hole is 5.468 or 5 7/16"
  • Hole size for lower two bolt holes is ½" and single upper hole is 5/8"

Item Details

1964-1972 GM

You may also be interested in:

Red Line 80402 CV-2 Synthetic Grease
                        

Red Line’s team of chemists formulate fully-synthetic lubricants using only the world’s finest base stocks. At Red Line, it’s not designed to be the cheapest – it’s built to be the best. Red Line only uses superior polyester-based products – resulting in lubricants that are extremely stable at high temperatures.

Synthetic CV-2 grease provides excellent water resistance, low temperature flow, and its very high melting point allows it to be used in high temperature wheel bearings, high angle and conventional CV-joints, chassis lubrication and many industrial applications.

  • Outperforms the best conventional or synthetic greases and lubes
  • Excellent high-temp stability, extreme-pressure protection, and water resistance
  • Used in a variety of applications with operating temps from -100°F to 500°F
  • Strong resistance to oxidation and corrosion, low evaporation and oil separation with a minimum effect on rubber seals
  • Contains an organic moly for chassis lubrication and high temp/high speed industrial equipment
  • Synthetic fluidity allows increases in bearing life up to 200%
  • Contains a red moly compound which is a superior lubricant to black moly disulfide lubricants
Wilwood Gator 1969-77 GM Mid-Size Brake Pads
                        

Speedway Motors is your one-stop shop for GM 1969-77 Midsize caliper brake pads.

Brake Pad Brochure (PDF)

Tech Tip:  Only use full metallic pads on coated rotors.

Sold as a pair of 2. One pair will outfit 1 caliper.

Brake Pad Brand Guide (Link) 

Learn how to properly Bed-In your brake pads by reading our tech article.  Bedding-In Brake Pad Procedure.

Hawk HB103H.590 Performance 1969-1977 GM HPS Brake Pads
                        

Get superior stopping power with Hawk Performance! Hawk Performance brake pads have been successful in virtually all forms of motorsports for over 16 years. This success helps Hawk Performance enjoy the benefits of the “Win on Sunday, Sell on Monday,” philosophy. Hawk is one of few brake pad manufacturers that can deliver on the promise, “Race Proven – Street Legal.”

Increasing the performance of your vehicles braking system is easy when you choose Hawk Performance’s HPS braking compound. This unique Ferro-Carbon formula was developed for street performance using the safety and quality of Motorsports severe-duty friction technology.

  • Higher coefficient of friction over stock brake pads
  • Provides 20-40% more stopping power and higher resistance to brake fade than most standard replacement pads
  • Less fade means a highly durable brake pad with less brake dust

Upgrade your 1969-77 GM Midsize braking system with these premium pads. Sold as a set of 4, 1 set will be needed to outfit 2 calipers.

Brake Pad Brand Guide (Link) 

Learn how to properly Bed-In your brake pads by reading our tech article.  Bedding-In Brake Pad Procedure.

 

Goodridge 12212 1969-76 GM Midsize Braided Stainless Brake Hose Kit
                        

This DOT certified brake line kit is designed to be a bolt-in for 1969-1976 GM midsize cars with original single piston front calipers and rear drum brakes. The kit includes two 16" front and one 14" rear stainless steel braided brake hoses, two banjo bolts and washers.

Two 16" front lines with 7/16" banjos on one end and 3/8-24 IFF on the "frame" end.

Banjo bolts and crush washers are included. 

One 14" line for the rear axle with 7/16-24 IFF on the "frame" end, and a handy "block" on the axle end. The "block" has 3/8-24 IFF on two sides, and a 7/16" hole on top so that it can be bolted to the rear axle.
64-72 GM Caliper Brackets
                        
                    
1964-74 GM Car OEM Style Disc Brake Spindles
                        

These spindles allow you to easily and affordably convert your stock drum front brakes to the original style GM front disc brakes. These new replacement forged steel disc brake spindles fit GM A-body, F-body and X-body passenger cars. These spindles are stock height, not dropped.

  • Replacement spindles
  • Stock height, not dropped

The primary difference between disc brake spindles and drum brake spindles is the thickness of the upper mount boss. The upper boss is 5/8" thicker on drum brake spindles than on the disc brake spindles. Spindles work well with Speedway disc brake kit 910-31958.

Fits the following applications: 

  • 1964-72 A-Body - Chevelle, Malibu, GTO, LeMans, 442, Cutlass, GS, Skylark
  • 1967-69 F-Body - Camaro, Firebird
  • 1968-74 X-Body - Nova, Apollo, Omega, Ventura