1960-72 Chevy Pickup Rear End Conversion Kit

							                        

                                                        
Give the dash of your 1967-72 Chevy or GMC truck a clean, custom look with this polished billet aluminum gauge panel. The gauge panel bolts into your original dash and accepts a 5 inch speedometer and 5 inch quad gauge, with a 3-3/8 inch tachometer in between. (Gauges sold separately.) 
Matching glove box lid 9101667 sold separately.
                                                    

						                        

							                        

                                                        Replace your worn out springs and lower your truck at the same time with these lowering springs. These springs offer modest lowering and proper spring rate for both S/B and B/B six-cylinder and V8 pickups.
                                                    
						                        

							                        

                                                        Replace your worn out springs and lower your truck at the same time with these lowering springs. These springs offer modest lowering and proper spring rate for both S/B and B/B six-cylinder and V8 pickups.
                                                    
						                        

							                        

                                                        
This kit allows you to upgrade your 1963-1966 Chevy pickup to disc brakes and gain the advantage of a more common 5-on-4.75" GM midsize passanger car bolt circle. A wheel change is required, but you want custom 5-lug wheels on your truck anyway, right? The new 11" rotors fit on your stock drum brake spindles. 
Kit includes 11" rotors, GM Midsize calipers, caliper brackets, bearings, seals, spindle nuts, dust caps, banjo bolts, brake hoses, 9" single diaphragm brake booster, master cylinder, disc/drum proportioning valve, and mounting hardware.
                                                    

						                        

							                        

                                                        Want to lower your 1963-70 Chevy truck, get better brakes and improve your wheel selection, all at the same time? This bolt-on package is for you! It includes new 2-1/2" drop spindles that will bolt to stock ball joints and tie rods, making it simple to swap disc brakes. The kit also includes new brake rotors with popular 5-on 5-lug pattern (with 1/2" studs,) plus calipers, bearings, seals, spindle nuts, dust caps, banjo bolts and brake hoses. Kits may not work with factory drum brake wheels.
                                                    
						                        

							                        

                                                        Want to make your truck handle like new? Installing one of our complete front end rebuild kits will help. These kits include upper and lower ball joints, inner and outer tie rod ends, tie rod adjusting sleeves and an idler arm. Kit contents may vary.
                                                    
						                        

							                        

                                                        Want to make your truck handle like new? Installing one of our complete front end rebuild kits will help. These kits include upper and lower ball joints, inner and outer tie rod ends, tie rod adjusting sleeves, an idler arm and a poly sway bar bushing kit. Kit contents may vary.
                                                    
						                        

							                        

                                                        Want to make your truck handle like new? Installing one of our complete front end rebuild kits will help. These kits include upper and lower ball joints, inner and outer tie rod ends, tie rod adjusting sleeves, an idler arm and a poly sway bar bushing kit. Kit contents may vary.
                                                    
						                        

							                        

                                                        
Complete the disc brake conversion on your 1963-66 Chevy pickup (or enhance your exhisting brake system) with this high quality master cylinder and brake booster kit. It includes a 9" power booster, dual-chamber master cylinder and a proportioning valve specifically designed for 1963-66 Chevy trucks. The easy-to-install kit can be set up for disc/drum or four-wheel disc applications and comes complete with installation hardware.
Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection.  
                                                    

						                        

							                        

                                                        
This kit allows you to upgrade your 1967-1970 Chevy pickup to disc brakes and gain the advantage of a more common 5-on-4.75" GM midsize passanger car bolt circle. A wheel change is required, but you want custom 5-lug wheels on your truck anyway, right? The new 11" rotors fit on your stock drum brake spindles. 
Kit includes 11" rotors, GM Midsize calipers, caliper brackets, bearings, seals, spindle nuts, dust caps, banjo bolts, brake hoses, 11" single diaphragm brake booster, master cylinder, disc/drum proportioning valve, and mounting hardware.
                                                    

						                        

							                        

                                                        
This kit allows you to upgrade your 1963-70 Chevy pickup to disc brakes and gain the advantage of a more common 5-on-4.75" GM midsize passanger car bolt circle. A wheel change is required, but you wanted custom 5-lug wheels on your truck anyways, right?
 
The  kit will make use of 1969-72 Chevelle rotors &  1969-77 Camaro calipers.
Use Speedway Outer Wheel Bearing #912TLM11949 (not included).
                                                    

						                        

							                        

                                                        
Give the dash of your 1967-72 Chevy or GMC truck a clean, custom look with this polished billet aluminum glove box lid. The glove box lid is the perfect complement to gauge panel 9100367, with a matching ball-milled design and brilliant polished finish.
                                                    

						                        

							                        

                                                        Six gauge polished billet aluminum panel for 1964-1966 Chevy pickup  truck dash. Made to fit into your OE bezel and is set up for two 3-3/8" gauges and four 2-1/6" accessory gauges.
                                                    
						                        

							                        

                                                        Five gauge polished billet aluminum panel for 1964-1966 Chevy pickup truck dash. Made to fit into your OE bezel and is set up for a 3-3/8" speedometer and four 2-1/6" accessory gauges.
                                                    
						                        

							                        

                                                        
These billet aluminum switch panel covers are made to fit your 1964-1966 Chevy pickup truck dash.  They are designed to fit in place of your switches for a new styled sleek look.
Billet aluminum
1964-1966 Chevy Pickup
Switch eliminator panel
                                                    

						                        

							                        

                                                        Billet aluminum glove box cover for 1964-1966 Chevy pickup trucks. Machined from 1/8" thick aluminum and mounts onto the glove box door using glue or tape.