Make your 1955-1956 Chevy more comfortable to drive by installing a new ididit steering column. These tilt, non-shift columns move the steering wheel back 2" while the non-tilt leaves it in the stock location. Uses the common 1969 and up GM wheel adapters and 3-7/8" wiring plug. Listed below are wiring adapters for the stock harness along with a floor mount. No-shift columns use 1" DD U-joints. When using the original steering box, the input shaft will need to be cut and modified into a 3/4" DD. 446-1255 Instructions (PDF)
Make your 1955-1956 Chevy more comfortable to drive by installing a new ididit steering column. These tilt, non-shift columns move the steering wheel back 2" while the non-tilt leaves it in the stock location. Uses the common 1969 and up GM wheel adapters and 3-7/8" wiring plug. Listed below are wiring adapters for the stock harness along with a floor mount. No-shift columns use 1" DD U-joints. When using the original steering box, the input shaft will need to be cut and modified into a 3/4" DD. 446-1255C Instructions (PDF)
Make your 1955-1956 Chevy more comfortable to drive byinstalling a new ididit steering column. These tilt non-shiftcolumns move the steering wheel back 2" while the non-tilt leaves it in the stock location. Uses the common 1969 and up GM wheel adapters and 3-7/8" wiring plug. Listed below are wiring adapters for the stock harness along with a floor mount.No-shift columns use 1" DD U-joints. When using the original steering box the input shaft will need to be cut and modified into a 3/4" DD.446-1255 Instructions (PDF)
Make your 1955-1956 Chevy more comfortable to drive byinstalling a new ididit steering column. These tilt non-shiftcolumns move the steering wheel back 2" while the non-tilt leaves it in the stock location. Uses the common 1969 and up GM wheel adapters and 3-7/8" wiring plug. Listed below are wiring adapters for the stock harness along with a floor mount. No-shift columns use 1" DD U-joints. When using the original steering box the input shaft will need to be cut and modified into a 3/4" DD.446-1255C Instructions (PDF)
Make your 1955-1956 Chevy more comfortable to drive byinstalling a new Ididit steering column. These tilt columns with shiftmove the steering wheel back 2" while the non-tilt leaves it in the stock location. Uses the common 1969 and up GM wheel adapters and 3-7/8" wiring plug. Listed below are wiring adapters for the stock harness along with a floor mount.Column uses 3/4"-36 spline U-joints. When using the original steering box the input shaft will need to be cut and modified into a 3/4" DD.446-1455 Instructions (PDF)
Make your 1955-1956 Chevy more comfortable to drive byinstalling a new ididit steering column. The tilt columns with shiftmove the steering wheel back 2" while the non-tilt leaves it in the stock location. Uses the common 1969 and up GM wheel adapters and 3-7/8" wiring plug. Listed below are wiring adapters for the stock harness along with a floor mount.Column uses 3/4"-36 spline U-joints. When using the original steering box the input shaft will need to be cut and modified into a 3/4" DD.446-1455C Instructions (PDF)
Make your 1955-1956 Chevy more comfortable to drive by installing a new Ididit steering column. These tilt columns with shift move the steering wheel back 2" while the non-tilt leaves it in the stock location. Uses the common 1969 and up GM wheel adapters and 3-7/8" wiring plug. Listed below are wiring adapters for the stock harness along with a floor mount. Column uses 3/4"-36 spline U-joints. When using the original steering box, the input shaft will need to be cut and modified into a 3/4" DD. 446-1455 Instructions (PDF)
Make your 1955-1956 Chevy more comfortable to drive by installing a new ididit steering column. The tilt columns with shift move the steering wheel back 2" while the non-tilt leaves it in the stock location. Uses the common 1969 and up GM wheel adapters and 3-7/8" wiring plug. Listed below are wiring adapters for the stock harness along with a floor mount. Column uses 3/4"-36 spline U-joints. When using the original steering box, the input shaft will need to be cut and modified into a 3/4" DD. 446-1455C Instructions (PDF)
Now you can update your 1955 or 1956 Chevy passenger car with a 5-way adjustable tilt wheel column. They accept a 1" DD U-joint or coupler and '67-'94 GM steering wheels or adapters. Keep in mind that a tilt column will move the steering wheel back about 2". If you are using a stock steering box you will have to modify it to accept a 3/4" DD. Made from stainless steel tubing available in a paintable or chrome finish, with a transmission shifter. Note: These columns are for use with 3 or ...