1955-79 Chevy/GM Street Series Clutch Kit, 10.4 Inch w/ 1-1/8 Inch-26 Spline

							                        

                                                        
By installing a lightweight aluminum flywheel for your SBC, you automatically bolt on up to 15 horsepower to the wheels. Your engine will reach higher RPMs quicker, due to lighter rotating mass. 
Made from 6061-T6 billet aluminum
Can be used with any type of clutch material
Locked locating dowel pins
SFI approved
Works with 10-1/2" (10.4") and 11" Diaphragm or Borg & Beck pressure plates
Inside hole dimension is 2.488 I.D. 
14 1/8" in diameter
                                                    

						                        

							                        

                                                        
By installing a lightweight aluminum flywheel, you automatically bolt on up to 15 horsepower to the wheels. Your engine will reach higher RPMs quicker, due to lighter rotating mass. 
Manufactured from 6061-T6 billet aluminum
Can be used with any type of clutch friction material 
Locked locating dowel pins
SFI approved
Works with 10-1/2" (10.4") Diaphragm or Borg & Beck pressure plates
Weighs 10.84 lbs
12 7/8" in diameter
                                                    

						                        

							                        

                                                        
The Ram HDX series clutch gives you a 40% increase in holding power for engines up to 450 hp. They are the perfect upgrade for street use. 
They include a 10-1/2" pressure plate, 10-1/2" clutch disc, the release bearing and alignment tool.  
                                                    

						                        

							                        

                                                        The Ram PowerGrip series clutch gives you 80% increase in holding power for engines up to 550 hp. They are the perfect upgrade for street/strip use. They include a 10-1/2" pressure plate, 10-1/2" clutch disc, the release bearing and alignment tool. 
                                                    
						                        

							                        

                                                        
These new kits feature a pressure plate with over 1700 lbs of clamping force. The clutch disc is unique in that it uses a double spring which is held in place by a unique spring retaining plate design.
Stronger, more agressive clutch than stock
Retains stock pedal feel
Perfect for mild engines
 Kits come complete with a pilot bearing, clutch disc, pressure plate and an alignment tool. 
                                                    

						                        

							                        

                                                        
HP Series Street/Strip kits feature a pressure plate with over 2500 lbs. of clamping force and a patented Kevlar friction disc. When combined, these components deliver a 50-60% increase in holding power over a typical stock replacement clutch. Plus, the Kevlar friction material is non-abrasive with a life expectancy of 2-3 times longer than organic friction plates.
For moderate street use w/ moderate power enhancements. Kits include a pilot bearing, clutch disc, pressure plate, and alignment tool to ease installation. 
                                                    

						                        

							                        

                                                        
HP Series Street/Strip kits feature a pressure plate with over 2500 lbs. of clamping force and a patented Kevlar friction disc. When combined, these components deliver a 50-60% increase in holding power over a typical stock replacement clutch. Plus, the Kevlar friction material is non-abrasive with a life expectancy of 2-3 times longer than organic friction plates.
For moderate street use w/ moderate power enhancements. Kits include a pilot bearing, clutch disc, pressure plate, and alignment tool to ease installation. 
                                                    

						                        

							                        

                                                        
HP Series Street/Strip kits feature a pressure plate with over 2500 lbs. of clamping force and a patented Kevlar friction disc. When combined, these components deliver a 50-60% increase in holding power over a typical stock replacement clutch. Plus, the Kevlar friction material is non-abrasive with a life expectancy of 2-3 times longer than organic friction plates.
For moderate street use w/ moderate power enhancements. Kits include a pilot bearing, clutch disc, pressure plate, and alignment tool to ease installation. 
                                                    

						                        

							                        

                                                        
HP Series Street/Strip kits feature a pressure plate with over 2500 lbs. of clamping force and a patented Kevlar friction disc. When combined, these components deliver a 50-60% increase in holding power over a typical stock replacement clutch. Plus, the Kevlar friction material is non-abrasive with a life expectancy of 2-3 times longer than organic friction plates.
For moderate street use w/ moderate power enhancements. Kits include a pilot bearing, clutch disc, pressure plate, and alignment tool to ease installation.