1955-57 Chevy Dropped Spindle Kit for GM Midsize Calipers
Click image to enlarge
Please note the following about this product:
- This item is sold as a kit.
Q & A (0)
What's in the Box
Dropped spindles will not only enhance the rake of your Tri-Five Chevy, they will also improve handling due to the lower roll center. These spindles are designed like the original only they have 2” of drop built in. Plus, dropped spindles maintain factory steering & suspension geometry so original steering arms can be used.
The optional disc brake kit features 10 ½” GM vented cast iron rotors and 1969-77 GM single piston calipers. Brake kit sold separately.
- 2" drop
- Completes both sides
- Maintains factory steering & suspension geometry
- Includes midsize caliper bracket & bolts
Note: These spindles cannot be used with stock drums or brake conversions for stock spindles.
910-34923 Instructions (PDF)
Item DetailsBrakes NOT included - use kit 91031995
- Track width is increased over stock O/E front end width by 3/4" overall or 3/8" per side.
This product has no reviews.
No questions have been asked.
You may also be interested in:
Adjustable Proportioning Blocks With Brake Light SwitchView$69.99
Quick ViewQuick View Detailsx
This adjustable proportioning block allows you to run lines from the master cylinder to the block and then to the appropriate wheels. What is neat about it is that it also contains the proportioning valve and brake light switch. This dramatically reduces the amount of fittings needed and potential leaks.
The adjustable proportioning valve regulates rear brake pressure, helping to maintain correct brake bias between front and rear brakes. It is designed for dual bowl master cylinders. The distribution block connects to the master cylinder and distributes brake fluid to all four wheels. An easy to turn handle with directional arrows makes it simple to either increase or decrease rear brake pressure.
The block accepts 3/16" brake lines and the inlets and outlets on this unit are 3/8"-24 inverted flare females. It has two inlets from the master cylinder, two outlets to the front brakes and one outlet to the rear brakes. It includes five stainless steel 3/16" fittings and wiring pigtail for rear brake light switch. Mounts to any convenient location. This is not a direct factory replacement for original blocks. Some line modifications may be necessary.
910-31358 Instructions (PDF)
Learn more about how adjustable proportioning valves work by reading our tech article. Brake System Selection.Compare
1958-64 Chevy Full-size Car Brake Booster Combo, Disc/Disc, Drum/DrumView$209.99
Quick ViewQuick View Detailsx
When you put modern disc brakes on your 1958-1964 Chevy full-size car (Bel-Air, Biscayne, Impala, 150 Series, 210 Series), you should update the master cylinder as well. Stock 4-wheel drum master cylinders do not have the capacity to supply the proper amount of pressure for disc brakes. For best results, we recommend using this simple, bolt-on master cylinder booster kit on all 4-wheel disc brake conversions or as a power brake upgrade for 4-wheel drum brake applications.
- 8" dual diaphragm booster
- 1" bore master cylinder
- Adjustable proportioning valve for rear brake line
- Master cylinder has outlets on both sides for ease of plumbing
- 1/2"-20 and 9/16"-18 outlets
Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection.Compare