Products to Compare (max of 3)
X
Compare These Parts
ALWAYS SECURE
America's Oldest Speed Shop ® Talk to the Experts. Call 800.979.0122, 7am-10pm, everyday.
Filters
Menu
Help Center
Help Center
x
Help Center

U.S.Order Line:

800.979.0122

(CST) 7am - 10pm

Race and Rod Tech Support

Mon-Fri 8am - 5pm

Canadian Order Line:

855.313.9180

International Order Line:

1.402.323.3200
Since 1952
Menu
x

1950 Pontiac Blue Dot Tail Light Assembly

Specs
Sold in Quantity:
Each
Lens Color:
Blue Dot
Bezel Finish:
Stainless
Gasket(s) Included:
Yes
Overall Diameter:
4.25
Hole Diameter:
2.50
Notes
Uses an 1157 dual filament bulb.
1950 Pontiac Blue Dot Tail Light Assembly

Click image to enlarge

Details

Reviews (13)

Q & A (4)

What's in the Box

Info

These 1950 Pontiac ,beautiful 4-1/4" blue dot tail lights are just the ticket for your '50 Pontiac or custom application. Features include a glass lens, chrome bezel and rubber gasket. Accepts one 1157 dual filament bulb.

The back of the taillight is not flat, so a hole approximately 2-1/2" I.D. is needed for mounting.

Notes

  1. Back of light is not flat. Requires a hole measuring approximately 2-1/2" I.D. for mounting.
  2. Wiring Guide: Housing = Ground, Red Wire = Taillights, White Wire = Stop/Turn

Customer Reviews

Rated 4.6 out of 5 by 13 reviewers.
RATING BREAKDOWN
13 reviews
5 Stars
10
4 Stars
2
3 Stars
0
2 Stars
1
1 Star
0
RECOMMEND THIS PRODUCT:

hotrodbob
Verified Purchaser
WV

Nice fit

May 21, 2016
These look good. I would have preferred screws. The studs were only 1/2 inch long and I was putting them through a wood bed. Removed studs nd installed screws so I guess its no big deal
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

KrazyHorse
Verified Purchaser
Denair California

1950 Pontiac Illinois

August 09, 2015
I put four of these on the back of the 59 Chevy pick up . This product is good quality fits well the finish was good . They look great after I was done
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

ron
Verified Reviewer
dallas tx

get what you pay for

June 03, 2015
Was a little skeptical based on price and it appears die cast and plating are both petty poor quality. Will def be swapping out with diff lights later
No, I would not recommend this product.
Full Size Image

Was this review helpful? 0 0

GrimmaceAteIt
Verified Purchaser

Love the purple glow from the blue dot!

September 27, 2014
I bought this light for my motorcycle, it's a great light. This ring is made of metal and has a good shine to it, the lens is real glass, pretty sturdy too (i've dropped it once or twice). The blue dot looks great when lit up it has a good purple glow to it. If using it for a motorcycle like I am, you need about 2 - 2 1/2" of clearance for a flush mount.
Pros:
  • blue dot looks great
  • real glass
  • metal ring shines nice
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

furburner
Verified Purchaser
Florida, USA

Verrrrry nice

September 24, 2014
They add a kewl factor to my 51 chevy PU, They also will fit into the rubber grommets used for truck and trailer lights, this sets them back in the hole like frenching and makes them easier to change bulbs, They can be set into blind spaces and the rubber gives them some vibrations resistance.
Pros:
  • kewl factor
  • bright and visible
Cons:
  • cant find any cons
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

furburner
Verified Purchaser
Florida, USA

Verrrrry nice

September 24, 2014
They add a kewl factor to my 51 chevy PU, They also will fit into the rubber grommets used for truck and trailer lights, this sets them back in the hole like frenching and makes them easier to change bulbs, They can be set into blind spaces and the rubber gives them some vibrations resistance.
Pros:
  • kewl factor
  • bright and visible
Cons:
  • cant find any cons
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

frameman61
Verified Purchaser
paradise ca

50 pontiac tailights

May 31, 2014
got here quick, and in excellent shape. on another note, bought a 32 3 w coupe body from these guys, and I'm very impressed! that's coming from a guy who owns a body shop, and in the bus. for 45 years. came shipped in enclosed crate no dam. and had it in stock!!! as nice as the downs manufacturing I bought some years back . waited 7 mo. to get that one. pleasure to do business with.
No, I would not recommend this product.
Full Size Image

Was this review helpful? 0 0

F.O.G.
Verified Purchaser
Normal, Il

Great Safety Upgrade

September 16, 2012
Bought the LED conversion at the same time. Even though the vehicle is considered a "Rat Truck", I want to make sure it is safe to drive and not a death trap. These lights are all glass with gasket kit included. paired with the LED kit it is a very effective and safe addition to the vehicle.
Pros:
  • Powerful
  • Can Withstand Use
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

wally
Verified Purchaser
Crestview Fl.

Just the right look.

June 02, 2012
Was just what I was looking for. These tail lights are very well made and appear they will hold up to many years of servise with proper p/m.
Pros:
  • Just the right look
  • Can Withstand Use
  • Would recomend to others
  • Reliable
  • Beautiful Fit and Finish
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

7 Classic
Verified Purchaser
Illinois

Great service and quality.

March 27, 2012
Just what I was looking for.
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Page 1 of 2

Product Q&A

4 questions : 5 answers

1 answers

will a 6 volt bulb fit in these assemblies, and if so do you sell them?

Goatguy
Galena, OH, USA
November 16, 2012

will a 6 volt bulb fit in these assemblies, and if so do you sell them?

Answers

November 16, 2012
Jason
Normally a dual filament 6 volt bulb with offset pins will go into the Cadilac bullet tail lights without problems. In minimal cases does any alteration need to be made to insure good contact at both terminals.
2 answers

Can i use this as a brake/turn signal combo? I mean 2 lights one left one right, one stays on as i break as the other blinks? Or am i going to have to run 4 lights?

cherry
tacoma, wa
September 09, 2011

Can i use this as a brake/turn signal combo? I mean 2 lights one left one right, one stays on as i break as the other blinks? Or am i going to have to run 4 lights?

Answers

September 25, 2014
furburner
Yes you can
September 12, 2011
John
This tail light uses the standard dual filament 1157 style bulb and functions for both the tail light and the stop/turn function. Only one tail light per side is needed to accommodate the three functions if wired correctly.
1 answers

Blue/Red Color Separation I've never seen this light in use...does the outer edge show a red glow while the blue center circle emits the blue? In othe words, can you see a defined blue light in the middle of the red when it is on?

StuartM
Georgia, USA
April 09, 2015

Blue/Red Color Separation I've never seen this light in use...does the outer edge show a red glow while the blue center circle emits the blue? In othe words, can you see a defined blue light in the middle of the red when it is on?

Answers

April 13, 2015
EricM
The small lens in the center is blue and exactly straight on may look blue but at almost any other angle tends to look purple mixing the red and blue together.
1 answers

Can this item be accessed for service all through the exterior interior will be inaccessible using on a recreational vehicle

lee h
minneapolis
April 02, 2016

Can this item be accessed for service all through the exterior interior will be inaccessible using on a recreational vehicle

Answers

April 04, 2016
Eric
Expert
No you will need to access the back side of the panel this is mounted in so that you can remove the light in order to replace the bulb.
Page 1 of 1

You may also be interested in:

  • 1950 Pontiac Red Tail Light Assembly
    1950 Pontiac Red Tail Light Assembly
    View
    (25)
    $24.99
    Compare
  • 1950 Pontiac LED Tail Light Assembly
    1950 Pontiac LED Tail Light Assembly
    View
    (15)
    $29.99
    Compare
  • 1950 Pontiac Tail Light Frenching Buckets
    1950 Pontiac Tail Light Frenching Buckets
    View
    (5)
    $49.99
    Compare
  • 1950 Pontiac Tail Light Mount Gasket
    1950 Pontiac Tail Light Mount Gasket
    View
    (2)
    $5.99
    Compare
  • 1950 Pontiac Tail Light Lens, Red Glass
    1950 Pontiac Tail Light Lens, Red Glass
    View
    (1)
    $8.99
    Compare
  • 1950 Pontiac Blue Dot Tail Light Lens, Passenger Car
    1950 Pontiac Blue Dot Tail Light Lens, Passenger Car
    View
    (0)
    $13.99
    Compare
  • 1950 Pontiac LED Tail Light Conversion Lens
    1950 Pontiac LED Tail Light Conversion Lens
    View
    (2)
    $59.99
    Compare
  • LED Flasher Unit, 2-Prong
    LED Flasher Unit, 2-Prong
    View
    (25)
    $14.99
    Compare
Suggestions