Products to Compare (max of 3)
X
Compare
ALWAYS SECURE
America's Oldest Speed Shop ® 800.979.0122 Lincoln, NE
Filters
Menu
Contact
Help Center
x
x
How to Contact Us

U.S.Order Line:

800.979.0122

(CST) 7am - 10pm

Race and Rod Tech Support

Mon-Fri 8am - 5pm

Canadian Order Line:

855.313.9180

International Order Line:

1.402.323.3200
Since 1952
Menu
x

1950 Pontiac Blue Dot Tail Light Assembly

SAME DAY SHIPPING! Most orders ship within 24 hours.

Specs
Sold in Quantity:
Each
Lens Color:
Blue Dot
Bezel Finish:
Stainless
Gasket(s) Included:
Yes
Garage Sale:
No
Overall Diameter:
4.25
Hole Diameter:
2.50
Notes
Uses an 1157 dual filament bulb.
1950 Pontiac Blue Dot Tail Light Assembly

Click image to enlarge

Details

Reviews

Q & A

What's in the Box

These 1950 Pontiac ,beautiful 4-1/4" blue dot tail lights are just the ticket for your '50 Pontiac or custom application. Features include a glass lens, chrome bezel and rubber gasket. Accepts one 1157 dual filament bulb.

The back of the taillight is not flat, so a hole approximately 2-1/2" I.D. is needed for mounting.

Notes

  1. Back of light is not flat. Requires a hole measuring approximately 2-1/2" I.D. for mounting.
  2. Wiring Guide: Housing = Ground, Red Wire = Taillights, White Wire = Stop/Turn

Customer Reviews

Rated 4.6 out of 5 by 12 reviewers.
RATING BREAKDOWN
12 reviews
5 Stars
9
4 Stars
2
3 Stars
0
2 Stars
1
1 Star
0
RECOMMEND THIS PRODUCT:

KrazyHorse
Verified Purchaser
Denair California

1950 Pontiac Illinois

August 09, 2015
I put four of these on the back of the 59 Chevy pick up . This product is good quality fits well the finish was good . They look great after I was done
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

ron
Verified Reviewer
dallas tx

get what you pay for

June 03, 2015
Was a little skeptical based on price and it appears die cast and plating are both petty poor quality. Will def be swapping out with diff lights later
No, I would not recommend this product.
Full Size Image

Was this review helpful? 0 0

GrimmaceAteIt
Verified Purchaser

Love the purple glow from the blue dot!

September 27, 2014
I bought this light for my motorcycle, it's a great light. This ring is made of metal and has a good shine to it, the lens is real glass, pretty sturdy too (i've dropped it once or twice). The blue dot looks great when lit up it has a good purple glow to it. If using it for a motorcycle like I am, you need about 2 - 2 1/2" of clearance for a flush mount.
Pros:
  • blue dot looks great
  • real glass
  • metal ring shines nice
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

furburner
Verified Purchaser
Florida, USA

Verrrrry nice

September 24, 2014
They add a kewl factor to my 51 chevy PU, They also will fit into the rubber grommets used for truck and trailer lights, this sets them back in the hole like frenching and makes them easier to change bulbs, They can be set into blind spaces and the rubber gives them some vibrations resistance.
Pros:
  • kewl factor
  • bright and visible
Cons:
  • cant find any cons
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

furburner
Verified Purchaser
Florida, USA

Verrrrry nice

September 24, 2014
They add a kewl factor to my 51 chevy PU, They also will fit into the rubber grommets used for truck and trailer lights, this sets them back in the hole like frenching and makes them easier to change bulbs, They can be set into blind spaces and the rubber gives them some vibrations resistance.
Pros:
  • bright and visible
  • kewl factor
Cons:
  • cant find any cons
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

frameman61
Verified Purchaser
paradise ca

50 pontiac tailights

May 31, 2014
got here quick, and in excellent shape. on another note, bought a 32 3 w coupe body from these guys, and I'm very impressed! that's coming from a guy who owns a body shop, and in the bus. for 45 years. came shipped in enclosed crate no dam. and had it in stock!!! as nice as the downs manufacturing I bought some years back . waited 7 mo. to get that one. pleasure to do business with.
No, I would not recommend this product.
Full Size Image

Was this review helpful? 0 0

F.O.G.
Verified Purchaser
Normal, Il

Great Safety Upgrade

September 16, 2012
Bought the LED conversion at the same time. Even though the vehicle is considered a "Rat Truck", I want to make sure it is safe to drive and not a death trap. These lights are all glass with gasket kit included. paired with the LED kit it is a very effective and safe addition to the vehicle.
Pros:
  • Powerful
  • Can Withstand Use
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

wally
Verified Purchaser
Crestview Fl.

Just the right look.

June 02, 2012
Was just what I was looking for. These tail lights are very well made and appear they will hold up to many years of servise with proper p/m.
Pros:
  • Just the right look
  • Can Withstand Use
  • Would recomend to others
  • Reliable
  • Beautiful Fit and Finish
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

7 Classic
Verified Purchaser
Illinois

Great service and quality.

March 27, 2012
Just what I was looking for.
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

azkrazee3
Golden Valley AZ

awesome!!!

May 11, 2011
I made my own buckets for these lights and I couldnt be happier ...... I put them In my 63 Dodge D100.
Pros:
  • Nice finish and fit
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Page 1 of 2

Product Q&A

3 questions : 4 answers

1 answers

will a 6 volt bulb fit in these assemblies, and if so do you sell them?

Goatguy
Galena, OH, USA
November 16, 2012

will a 6 volt bulb fit in these assemblies, and if so do you sell them?

Answers

November 16, 2012
Jason
Normally a dual filament 6 volt bulb with offset pins will go into the Cadilac bullet tail lights without problems. In minimal cases does any alteration need to be made to insure good contact at both terminals.
2 answers

Can i use this as a brake/turn signal combo? I mean 2 lights one left one right, one stays on as i break as the other blinks? Or am i going to have to run 4 lights?

cherry
tacoma, wa
September 09, 2011

Can i use this as a brake/turn signal combo? I mean 2 lights one left one right, one stays on as i break as the other blinks? Or am i going to have to run 4 lights?

Answers

September 25, 2014
furburner
Yes you can
September 12, 2011
John
This tail light uses the standard dual filament 1157 style bulb and functions for both the tail light and the stop/turn function. Only one tail light per side is needed to accommodate the three functions if wired correctly.
1 answers

Blue/Red Color Separation I've never seen this light in use...does the outer edge show a red glow while the blue center circle emits the blue? In othe words, can you see a defined blue light in the middle of the red when it is on?

StuartM
Georgia, USA
April 09, 2015

Blue/Red Color Separation I've never seen this light in use...does the outer edge show a red glow while the blue center circle emits the blue? In othe words, can you see a defined blue light in the middle of the red when it is on?

Answers

April 13, 2015
EricM
The small lens in the center is blue and exactly straight on may look blue but at almost any other angle tends to look purple mixing the red and blue together.
Page 1 of 1

You may also be interested in:

1950 Pontiac Red Tail Light Assembly
(Part #91137050)
                        

The 1950 Pontiac clean round shape and domed lens of the tail light have been a staple on hot rods for more than five decades. This beautiful taillight assembly is a faithful reproduction of that classic design and features a glass lens just like the original. This taillight makes a perfect finishing touch on a wide variety of street rods and customs – or you could even use it on a '50 Pontiac!

  • Classic shape and design
  • Easily adaptable to a variety of vehicles
  • Red glass lens
  • Chrome bezel
  • Rubber mount gasket included
  • Single 1157 dual-filament bulb
1950 Pontiac LED Tail Light Assembly
(Part #91137053)
                        

1950 Pontiac, chrome rim with powerful red LED tail lights. These taillights are an excellent replacement for your '50 Pontiac or custom application.

  • 41 super bright red LEDs
  • Polished stainless steel housing
  • Epoxy coated, fully sealed electronics
  • Solid state circuit board for 12V systems
Taillight-to-body mount gasket NOT included.
1950 Pontiac Tail Light Frenching Buckets
(Part #91137037)
                        

These 1950 Pontiac, all steel tail light buckets allow you to "French" your '50 Pontiac taillights into the body. Welding & bodywork required.

1950 Pontiac Tail Light Mount Gasket
(Part #91137057)
                        

These '50 Pointiac tailmount gaskets will protect your 1950 Pontiac tail light from dirt, moisture, scratches, and corrosion with this original-style, quality black rubber reproduction gasket. 

  • Tail light-to-body mount gasket 
  • 1950 Pontiac passenger cars
  • OEM style replacement
  • High quality black rubber
  • Protects tail light and paint from scratches, moisture, and dirt
1950 Pontiac Tail Light Lens, Red Glass
(Part #91062158)
                        

Replace those old, cracked, or missing tail lights with this '50 Pontiac red glass lens.  These taillights are reproductions for your 1950 Pontiac passenger car. 

  • Original replacements
  • 1950 Pontiac passenger car
  • Red glass lens
  • Housing & Bezel sold separately
  • Sold each
1950 Pontiac Blue Dot Tail Light Lens, Passenger Car
(Part #91062159)
                        

These reproduction red glass tail light lens are for 1950 Pontiac cars.  They feature the classic Lynx-Eye blue dot in the center. These taillights give a bright lavender appearance when brake light comes on.

  • Original replacement
  • Red glass lens
  • Classic Lynx-Eye blue dot in center
  • '50 Pontiac cars only
  • Housing & Bezel sold separately
  • Sold each
1950 Pontiac LED Tail Light Conversion Lens
(Part #91137052)
                        

This 1950 Pontiac LED tail light conversion kit converts your 50 Pontiac tail, stop, and turn signal lights into very bright and visible LEDs. LEDs feature a wide viewing angle of 100 degrees as well as cool operation and long life. This kit is designed to bolt into a 1949-52 Ponitac taillight housing with the provided stainless steel brackets. Your stock lenses are reused for a factory appearance when the lights are off. A true bolt-in for stock Pontiac taillight housings or reproduction units.

Kit Contents:

  • (2) LED arrays
  • (4) solderless connectors
  • (2) LED to car electrical harness
  • Installation instructions

The red wire is for stop light/turn signal. The black wire is for the tail light.

1950 Pontiac LED Tail Light Conversion Instructions (PDF)

Item Details

'Uses YOUR ''50 Pontiac housings'
LED Flasher Unit, 2-Prong
(Part #91064110)
                        

The technology of LED replacement blubs has come a long way the last few years. The problem is that they have gotten so efficient, that even electronic flashers that once worked, now don't. So now we offer a new flasher made specifically for LED bulbs. These flashers do not need a grounded connection.