Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf

1950 Pontiac Red Tail Light Assembly

SAME DAY SHIPPING! Most orders ship within 24 hours.

Specs
Sold in Quantity:
Each
Overall Thickness:
2.00
Overall Diameter:
4.25
Hole Diameter:
2.50
Center to Center:
3.50
Voltage:
12
Lens Color:
Red
Bezel Finish:
Chrome
Gasket(s) Included:
Yes
Notes
The lens is glass and uses a single 1157 bulb.
1950 Pontiac Red Tail Light Assembly1950 Pontiac Red Tail Light Assembly1950 Pontiac Red Tail Light Assembly
1950 Pontiac Red Tail Light Assembly

Click image to enlarge

Speeday Motors Logo
X
1950 Pontiac Red Tail Light Assembly

Details

Reviews

Q & A

What's in the Box

The 1950 Pontiac clean round shape and domed lens of the tail light have been a staple on hot rods for more than five decades. This beautiful taillight assembly is a faithful reproduction of that classic design and features a glass lens just like the original. This taillight makes a perfect finishing touch on a wide variety of street rods and customs – or you could even use it on a '50 Pontiac!

  • Classic shape and design
  • Easily adaptable to a variety of vehicles
  • Red glass lens
  • Chrome bezel
  • Rubber mount gasket included
  • Single 1157 dual-filament bulb

Notes

  1. Back of light is not flat. Requires a hole measuring approximately 2-1/2" I.D. for mounting.
  2. Wiring Guide: Housing = Ground, Red Wire = Taillights, White Wire = Stop/Turn

Item Details

Sold individually

You may also be interested in:

Super Brite Quartz Halogen Tail Lamp 1157 Bulbs
                        Replaces 1157 - 12 V tail lamp bulbs. 

NOTE: Be Careful - Quartz Halogen bulbs emit substantial amounts of heat. Best if used with glass lenses and metal housings.

NEVER touch these bulbs with bare fingers! Smudges and skin oil will cause quick bulb failure. Wipe them with a cloth containing rubbing alcohol before use!

1950 Pontiac Blue Dot Tail Light Assembly
                        These 1950 Pontiac ,beautiful 4-1/4" blue dot tail lights are just the ticket for your '50 Pontiac or custom application. Features include a glass lens, chrome bezel and rubber gasket. Accepts one 1157 dual filament bulb. 

The back of the taillight is not flat, so a hole approximately 2-1/2" I.D. is needed for mounting.
1950 Pontiac LED Tail Light Assembly
                        

1950 Pontiac, chrome rim with powerful red LED tail lights. These taillights are an excellent replacement for your '50 Pontiac or custom application.

  • 41 super bright red LEDs
  • Polished stainless steel housing
  • Epoxy coated, fully sealed electronics
  • Solid state circuit board for 12V systems
Taillight-to-body mount gasket NOT included.
1950 Pontiac Tail Light Lens, Red Glass
                        

Replace those old, cracked, or missing tail lights with this '50 Pontiac red glass lens.  These taillights are reproductions for your 1950 Pontiac passenger car. 

  • Original replacements
  • 1950 Pontiac passenger car
  • Red glass lens
  • Housing & Bezel sold separately
  • Sold each
1950 Pontiac Blue Dot Tail Light Lens, Passenger Car
                        

These reproduction red glass tail light lens are for 1950 Pontiac cars.  They feature the classic Lynx-Eye blue dot in the center. These taillights give a bright lavender appearance when brake light comes on.

  • Original replacement
  • Red glass lens
  • Classic Lynx-Eye blue dot in center
  • '50 Pontiac cars only
  • Housing & Bezel sold separately
  • Sold each
1950 Pontiac LED Tail Light Conversion Lens
                        

This 1950 Pontiac LED tail light conversion kit converts your '50 Pontiac tail, stop, and turn signal lights into very bright and visible LED's. LED's feature a wide viewing angle of 100 degrees as well as cool operation and long life. This kit is designed to bolt into a 1949-52 Ponitac taillight housing with the provided stainless steel brackets. Your stock lenses are reused for a factory appearance when the lights are off. A true bolt-in for stock Pontiac taillight housings or reproduction units.

Kit Contents:

  • (2) LED arrays
  • (4) solderless connectors
  • (2) LED to car electrical harness
  • Installation instructions

The red wire is for stop light/turn signal. The black wire is for the tail light.

1950 Pontiac LED Tail Light Conversion Instructions (PDF)

1950 Pontiac Tail Light Frenching Buckets
                        

These 1950 Pontiac, all steel tail light buckets allow you to "French" your '50 Pontiac taillights into the body. Welding & bodywork required.

LED Flasher Unit, 2-Prong
                        

The technology of LED replacement blubs has come a long way the last few years. The problem is that they have gotten so efficient, that even electronic flashers that once worked, now don't. So now we offer a new flasher made specifically for LED blubs. These flashers do not need a grounded connection.