Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith

1950 Pontiac Blue Dot Tail Light Assembly


Sold in Quantity:
Overall Diameter:
Hole Diameter:
Lens Color:
Blue Dot
Bezel Finish:
Gasket(s) Included:
Uses an 1157 dual filament bulb.

Share by Email


Click image to enlarge




Q & A

What's in the Box

These beautiful 4-1/4" blue dot tail lights are just the ticket for your 1950 Pontiac or custom application. Features include a glass lens, chrome bezel and rubber gasket. Accepts one 1157 dual filament bulb.

The back of the light is not flat, so a hole approximately 2-1/2" I.D. is needed for mounting.


  1. Back of light is not flat. Requires a hole measuring approximately 2-1/2" I.D. for mounting.
  2. Wiring Guide: Housing = Ground, Red Wire = Taillights, White Wire = Stop/Turn

Item Details

Sold individually

You may also be interested in:

1950 Pontiac Red Tail Light Assembly

The clean round shape and domed lens of the 1950 Pontiac tail light have been a staple on hot rods for more than five decades. This beautiful tail light assembly is a faithful reproduction of that classic design and features a glass lens just like the original. This taillight makes a perfect finishing touch on a wide variety of street rods and customs – or you could even use it on a 1950 Pontiac!

  • Classic shape and design
  • Easily adaptable to a variety of vehicles
  • Red glass lens
  • Chrome bezel
  • Rubber mount gasket included
  • Single 1157 dual-filament bulb
1950 Pontiac LED Tail Light Assembly

Chrome rim with powerful red LED tail lights. An excellent replacement for your 1950 Pontiac or custom application.

  • 41 super bright red LEDs
  • Polished stainless steel housing
  • Epoxy coated, fully sealed electronics
  • Solid state circuit board for 12V systems
Taillight-to-body mount gasket NOT included.
1950 Pontiac Tail Light Frenching Buckets

These all steel tail light buckets allow you to "French" your 1950 Pontiac taillights into the body. Welding & bodywork required.

1950 Pontiac Tail Light Mount Gasket

Protect your 1950 Pontiac tail light from dirt, moisture, scratches, and corrosion with this original-style, quality black rubber reproduction gasket. 

  • Tail light-to-body mount gasket 
  • 1950 Pontiac passenger cars
  • OEM style replacement
  • High quality black rubber
  • Protects tail light and paint from scratches, moisture, and dirt
1950 Pontiac Tail Light Lens, Red Glass

Replace those old, cracked, or missing tail lights with these red glass lens.  They are reproductions for your 1950 Pontiac passenger car. 

  • Original replacements
  • 1950 Pontiac passenger car
  • Red glass lens
  • Housing & Bezel sold separately
  • Sold each
1950 Pontiac Blue Dot Tail Light Lens, Passenger Car

These reproduction red glass tail light lens are for 1950 Pontiac cars.  They feature the classic Lynx-Eye blue dot in the center.  Gives a bright lavender appearance when brake light comes on.

  • Original replacement
  • Red glass lens
  • Classic Lynx-Eye blue dot in center
  • 1950 Pontiac cars only
  • Housing & Bezel sold separately
  • Sold each
1950 Pontiac LED Tail Light Conversion Lens

This LED tail light conversion kit converts your 1950 Pontiac tail, stop, and turn signal lights into very bright and visible LED's. LED's feature a wide viewing angle of 100 degrees as well as cool operation and long life. This kit is designed to bolt into a 1949-52 Ponitac tail light housing with the provided stainless steel brackets. Your stock lenses are reused for a factory appearance when the lights are off. A true bolt-in for stock Pontiac taillight housings or reproduction units.

Kit Contents:

  • (2) LED arrays
  • (4) solderless connectors
  • (2) LED to car electrical harness
  • Installation instructions

The red wire is for stop light/turn signal. The black wire is for the tail light.

1950 Pontiac LED Tail Light Conversion Instructions (PDF)

LED Flasher Unit, 2-Prong

The technology of LED replacement blubs has come a long way the last few years. The problem is that they have gotten so efficient, that even electronic flashers that once worked, now don't. So now we offer a new flasher made specifically for LED blubs. These flashers do not need a grounded connection.