Products to Compare (max of 3)
X
Compare
ALWAYS SECURE
America's Oldest Speed Shop ® 800.979.0122 Lincoln, NE
Filters
Menu
Contact
Help Center
x
x
How to Contact Us

U.S.Order Line:

800.979.0122

(CST) 7am - 10pm

Race and Rod Tech Support

Mon-Fri 8am - 5pm

Canadian Order Line:

855.313.9180

International Order Line:

1.402.323.3200
Since 1952
Menu
x

1940 Ford Blue Dot Tail Lights

SAME DAY SHIPPING! Most orders ship within 24 hours.

1940 Ford Blue Dot Tail Lights

Click image to enlarge

Details

Reviews

Q & A

What's in the Box

Blue dot tail light assemblies for your 1940 Ford car use a common 1157 bulb for the stop, tail, and turn signal functions. This tail light is designed to bolt into a 1940 Ford fender in place of the original taillight.

Measures 4 5/8" tall, 4.832" wide and 3-7/8" deep.

  • Stainless steel rim
  • Original "Duolamp" lettering
  • Cloth braid wiring
  • Glass red lens
  • 12 V dual filament 1157 bulb

Lamps sold individually. Mounting gaskets NOT included.

Customer Reviews

This product has no reviews.

Product Q&A

3 questions : 3 answers

1 answers

can these be changed to amber dots http://www.speedwaymotors.com/Amber-Dots,7852.html Will these fit in the blue dot hole?

JohnnyDangerous
August 03, 2014

can these be changed to amber dots http://www.speedwaymotors.com/Amber-Dots,7852.html Will these fit in the blue dot hole?

Answers

August 05, 2014
EricM
We apologize but don’t offer the 40 tail lights with amber dots. We do offer the amber dots under number 91062151 but they will not be a direct swap due to the blue dot in these lenses being notched out for the trim bezel.
1 answers

can i use these tail lights on a 1940 plymouth p-10

zekediablo
pasadena tx
February 07, 2013

can i use these tail lights on a 1940 plymouth p-10

Answers

February 08, 2013
Jason
These tail lights under part number 91137021 for the 40 Ford do NOT mount to a flat surface and match the contour of the 40 Plymouth cars. The light comes to a peak in the vertical center to match the Ford fender contour and without extensive modification to your 40 Plymouth fender will not fit properly. We apologize for not being able to be of service.
1 answers

what angle are the sides to each other, for mounting purposes?

May 05, 2011

what angle are the sides to each other, for mounting purposes?

Answers

May 14, 2011
Tech
The "V" at the top is angled up 20 degrees on either side ( 20 degrees up from the bottom as well ). From the center the rim angles back 10 degrees on both sides.
Page 1 of 1

You may also be interested in:

1940 Ford Tail Lights
(Part #91137020)
                        

Standard tail light assemblies for your 1940 Ford car use a common 1157 bulb for the stop, tail, and turn signal functions. This tail light is designed to bolt into a 1940 Ford fender in place of the original tail light.

  • Stainless steel rim
  • Original "Duolamp" lettering
  • Cloth braided wiring
  • Glass red lens
  • 12 V dual filament 1157 bulb

Lamps sold individually. Mounting gaskets NOT included.

1940 Ford LED Tail Lights
(Part #91137040)
                        

Complete tail light assembly with very bright and visible LED's for the stop, tail, and turn signal functions. LED's feature a wide viewing angle of 100 degrees as well as cool operation and long life. This led taillight is designed to bolt into a 1940 Ford fender in place of the original taillight.

Kit Contents: (2) LED complete taillamp assemblies, (4) solderless connectors, (2) LED to car electrical harness, (2) custom molded taillamp to body seal, installation instructions.

  • Bezel re-shaped to fit tightly to fender
  • External screw hole eliminated for cleaner look
  • 14 high intensity LED's per lamp 
  • Rust-proof composite taillamp bucket
  • Stainless steel studs, nuts, and washers
  • Acrylic lens
  • Dual built-in reflectors for lights off safety
  • Chromed plastic bezel
  • Taillamp-to-body gasket seal

1940 Ford Tail Light Installation Instructions (PDF) 

1940 Ford Tail Light Mounting Gasket
(Part #75101A13420)
                        

Protect your 1940 Ford tail light from dirt, moisture, scratches, and corrosion with this original-style, quality black rubber reproduction gasket.

Sold as a pair.