Since 1952
America's Oldest Speed Shop ®
Speedway Motors Bill Smith

1940-1953 Chevy Truck LED Tail Lights

SAME DAY SHIPPING!

Share by Email

From
To

Click image to enlarge

X

Details

Reviews

Q & A

What's in the Box

These 12 volt LED tail lights fit most 1940-1953 Chevrolet trucks that use two staggered bolts on the rear for mounting. A total of 45 super bright red LED's mount in a stainless steel housing.

  • Polycarbonate Lens
  • The left drivers side taillight has a license plate 6 LED light.
  • The right passenger side taillight does not have a license plate light.


Note: A LED flasher is only required when all the lights on the vehicle are LED.

1940-1953 Chevy Truck Tail Light Installation Instructions (pdf)

Specs

  • 2-3/4" wide
  • 4-1/8" high
  • Reasonably flat on the back
  • Wiring Guide:
    • White - Grounded
    • Red - Stop/Turn
    • Black - Taillights

Item Details

With license plate light provision

You may also be interested in:

American Autowire 500467 1947-54 Chevy Pick-up Wiring Harness
                        

The wiring in your classic pick-up is about fifty years old and probably not up to the task anymore. These harnesses plug into many of the original switches and connectors, but include:

  • modern fuse panel
  • ignition switch
  • headlight switch
  • dimmer switch
  • connectors for tilt columns
  • alternators
  • dome lights
  • head and tail lights, etc.

Everything is color coded and instructions are included. It's a painless process. For 12 Volt upgrades.

Chevy Pick-up Wiper Motor Kit
                        

Upgrade your classic 1947-59 Chevy Pick-up with an intermittent wiper kit. Includes switch, motor, wiring and required hardware. 

 

NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

Classic Instruments 1947-53 Chevy Pickup Vintage Gauge Set
                        Classic Instruments built this package to easily replace the gauges in your '47-'53 Chevy pickup. The gauges have a 140 mph electric speedometer, voltmeter, oil pressure, water temperature and fuel level. The fuel level gauge works with your stock '47-'53 Chevy 0-30 ohm sending unit. All other sending units are included.
                    
BedWood Wood Kit for 1947-51 1st Series Chevy 3100 SWB Stepside Pickup
                        

These premier show quality BedWood kits are precision milled to 3/4" thick, properly grooved, trimmed to length, sanded and ready to finish! Made in Kentucky, U.S.A. 

  • Bed Wood - Non-Drilled
  • Designed for 1947-51 First Series Chevy 3100 SWB Stepside 
  • Made in Kentucky, U.S.A.
  • Choice of Red Oak, White Oak, or Walnut
  • Precision milled to 3/4" thick
  • Bed Size: 76-7/8" Length x 50" Width
  • Board Qty: 9
  • Bed Strip Qty Needed: 8

Be sure to add your choice of two styles of extruded aluminum strip kits (includes hidden fasteners).

BedWood Wood Kit for 1951 2nd Series - 1953 Chevy 3100 SWB Stepside Pickup
                        

These premier show quality BedWood kits are precision milled to 3/4" thick, properly grooved, trimmed to length, sanded and ready to finish! Made in Kentucky, U.S.A. 

  • Bed Wood - Non-Drilled
  • Designed for 1951 Second Series - 1953 Chevy 3100 SWB Stepside
  • Made in Kentucky, U.S.A.
  • Choice of Red Oak, White Oak, or Walnut
  • Precision milled to 3/4" thick
  • Bed Size: 77-1/8" Length x 50" Width
  • Board Qty: 8
  • Bed Strip Qty Needed: 7

Be sure to add your choice of two styles of extruded aluminum strip kits (includes hidden fasteners).

BedWood Wood Kit for 1951 2nd Series - 53 Chevy 3100 LWB Stepside Pickup
                        

These premier show quality BedWood kits are precision milled to 3/4" thick, properly grooved, trimmed to length, sanded and ready to finish! Made in Kentucky, U.S.A. 

  • Bed Wood - Non-Drilled
  • Designed for 1951 Second Series - 1953 Chevy 3100 LWB Stepside
  • Made in Kentucky, U.S.A.
  • Choice of Red Oak, White Oak, or Walnut
  • Precision milled to 3/4" thick
  • Bed Size: 85-13/16" Length x 50" Width
  • Board Qty: 8
  • Bed Strip Qty Needed: 7

Be sure to add your choice of two styles of extruded aluminum strip kits (includes hidden fasteners).

BedWood Wood Kit for 1947-51 1st Series Chevy 3100 LWB Stepside Pickup
                        

These premier show quality BedWood kits are precision milled to 3/4" thick, properly grooved, trimmed to length, sanded and ready to finish! Made in Kentucky, U.S.A. 

  • Bed Wood - Non-Drilled
  • Designed for 1947-51 First Series Chevy 3100 LWB Stepside
  • Made in Kentucky, U.S.A.
  • Choice of Red Oak, White Oak, or Walnut
  • Precision milled to 3/4" thick
  • Bed Size: 85-13/16" Length x 50" Width
  • Board Qty: 9
  • Bed Strip Qty Needed: 8

Be sure to add your choice of two styles of extruded aluminum strip kits (includes hidden fasteners).

LED Flasher Unit, 2-Prong
                        

The technology of LED replacement blubs has come a long way the last few years. The problem is that they have gotten so efficient, that even electronic flashers that once worked, now don't. So now we offer a new flasher made specifically for LED blubs. These flashers do not need a grounded connection.