No items in Shopping Cart
These lights are flat on the back for easy mounting to most any surface, as each only needs 3 holes (1/4" Diameter) drilled in the mount surface. Wired for taillight, stoplight, and turn signals. 12V. Includes base gasket.
used this for tail lights on my 55 ford pick up
I had 39 Ford tail lights in the back of my T-Bucket and even with LED bulbs you literally couldn't see them in the bright sun light. These cure that problem in Spades. My concern before getting them is that they would be too big for a T, but they're only about 50% bigger and really look nice on it.
As nice a part as I have ever purchased.
great looking tail light many applications
Tail lights were put on my 1932 ford pick-up, they were french into bottom of bed and make it look as if the were designed for this truck. had these put on truck because of metal work fab
Get your questions answered by the community. Ask or answer questions below.
hi im interested installing this on my 53 ute.What i need to know is the indorcator yellow or does the red light flash when turning eg same as americen.
Asked on 7/9/2011 2:22:08 AM by horie from melbourne australia
These lights function as tail light and also stop/turn and in the turn mode use same filaments as the brake and illuminate in red. We currently do not offer a light with the indicator turn filaments or lens is yellow or amber.
Answered on 7/12/2011 7:17:22 AM by John from Speedway
I am using these lights on a street rod with a Painless wire harness, Do i need to use dummy loads for the LEDs to work ?
Asked on 4/22/2012 2:09:07 PM by from
On an all LED system you will need the dummy loads to create current draw and enable the standard flasher to cycle. If your other turn signal bulbs are of 1156 or 1157 style then your standard flashers may work without the dummy loads.
Answered on 4/24/2012 10:30:51 AM by John from Speedway
Do you have a question about this product?