Products to Compare (max of 3)
Compare These Parts
America's Oldest Speed Shop ® Talk to the Experts. Call 800.979.0122, 7am-10pm, everyday.
Help Center
Help Center

U.S.Order Line:


(CST) 7am - 10pm

Race and Rod Tech Support

Mon-Fri 8am - 5pm

Canadian Order Line:


International Order Line:

Since 1952
Shop By

1934 Ford Greyhound Hood Ornament

1934 Ford Greyhound Hood Ornament

Click image to enlarge

Please note the following about this product:

  • This product is discontinued.


Reviews (0)

Q & A (0)

What's in the Box


These greyhound hood ornaments are a graceful chrome plated reproduction of the popular 1930's accessory. Attaches using parts from your existing radiator cap.

  • Chrome plated
  • Attaches through center of your existing radiator cap
  • Fits 1934 Ford
  • Base is approximately 2-7/8" O.D. wide
  • Base is approximately 3-7/8" O.D. long
  • Overall length is approximately 9"
  • One threaded hole in the center of base

Note:  Will totally replace an original radiator cap but requires internal parts from a stock radiator cap for mounting. If you have a stock 1934 cap, dismantle it for the parts. If you have no cap, you can purchase 91132002

If you turn a stock radiator cap upside down, you will note that there is a screw which retains a washer with two “ears” (which fit into the slots of the radiator neck) and the sealing gasket with a backup washer behind it. Those are the pieces that need to be transferred to the Greyhound.

If you are putting the Greyhound on a Hot Rod that is using a pressurized cooling system (and therefore the stock cap is simply an ornament and not subjected to coolant or pressure), you could probably use a large fender-washer and a normal screw to hold the Greyhound in place.

You may also be interested in: