ALWAYS SECURE
America's Oldest Speed Shop ® 800.979.0122 Lincoln, NE
Filters
Menu
Contact
Help Center
x
x
How to Contact Us

U.S.Order Line:

800.979.0122

(CST) 7am - 10pm

Race and Rod Tech Support

Mon-Fri 8am - 5pm

Canadian Order Line:

855.313.9180

International Order Line:

1.402.323.3200
Since 1952
Menu
x

1933-1936 Ford Stainless Tail Lights

SAME DAY SHIPPING! Order within the next 15 hours 27 minutes and receive same day shipping

Specs
Material Type:
Stainless Steel
Overall Height:
3.00
Sold in Quantity:
Each
Overall Thickness:
3.00
Overall Diameter:
4.00
Center to Center:
3.750
Voltage:
12
Lens Color:
Red
Bezel Finish:
Stainless
Bulb Type:
1157
Lens Material:
Glass
Garage Sale:
No
Notes
Has lens to illuminate license plate.
1933-1936 Ford Stainless Tail Lights

Click image to enlarge

Details

Reviews

Q & A

What's in the Box

These are an exact duplicate of the original 1933-1936 Ford car glass lens tail lights. Also fits later model pick-ups and wagons. Left light has a lens to illuminate the license plate.

  • Highly polished stainless steel housing & rim
  • Cloth braided wire loom
  • Stainless steel screws
  • 12 volt bulb
  • Red glass lens
  • Choose right or left

Notes

The green wire powers the brake lights and the black wire powers the running lights.

Customer Reviews

Rated 4.8 out of 5 by 6 reviewers.
RATING BREAKDOWN
6 reviews
5 Stars
5
4 Stars
1
3 Stars
0
2 Stars
0
1 Star
0
RECOMMEND THIS PRODUCT:

Leong Fong
Verified Purchaser
Verified Reviewer
Sacramento , Ca

Look good like they should

June 04, 2015
Had one simple problem that cost me a lot of time isolating. After wiring whole car my dash lites blinked w/ turn signals and both tail lites blinking at same time turned out to be bad bulb in one of the tail lites. The bulb looked good but blinker and tail lite circuit touching somewhere inside bulb. Bulb was a no name brand. With such a great product a good name brand bulb would of saved me a lot of time
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Merchant Response:

Speedway Motors Customer Service team has issued this customer a gift card for the troubles experienced. These comments have been forwarded on to our QC team to further investigate the issue experienced with these lights. We apologize for any inconvenience this may have caused and are always happy to help in any way.
smilebigtt
Verified Purchaser
topeka, ks

This light has a nice finish, a correct

October 13, 2014
I was looking for a light that did not have the inside divider between the tail and stop light. I wanted both tail and stop light to illuminate the entire light. Has a nice finish. The only draw back for my needs was it came with a 12 volt bulb. Just replaced with a 6 volt bulb. This light fits the bill.
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Case1934
Verified Purchaser
CA

WOW!!!

September 19, 2014
Real nice rear lights, Great cost. bought both left and right.
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

36fordster
Verified Purchaser

Great Product for a good price!

June 18, 2014
Bought these for my Mullins trailer to match up to my 36 ford. They were easy to install as they are supplied with bullet connectors and bulbs. I did upgrade my bulbs to bright led replacements to match the ones on my 36 Ford. installation was easy if you use a frame ground and its only two bolts to hold each in place. They match very well to my 36 lights and look great. I saw no fit and finish issues on the body or the glass. These would be great low price tail lights for any trailer projects. They are small easy to mount to any thing you can drill two holes or screw into.
Pros:
  • low price and great match to origonal design.
Cons:
  • frame ground or lug at bolt to ensure they work.
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Channelkat
Verified Purchaser
Rogers AR

Excellent product for the money

April 26, 2011
Good product for the money
Pros:
  • Easy To Install
  • Attractive Design
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

TATTER CHIP
Verified Purchaser
URBANA OH

GOOD BANG FOR THE BUCK

November 23, 2010
IT DOES THE JOB
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Page 1 of 1

Product Q&A

4 questions : 7 answers

2 answers

Is this also for turn signals and stop lights

rocketengine
January 15, 2013

Is this also for turn signals and stop lights

Answers

June 19, 2014
36fordster
Yes the bulb is a 1157 bulb that covers all taillight features driving, tail, brakes, turn signals.
January 15, 2013
Jason
These lights run the standard 1157 dual filament bulb of which one filament is for the tail lights and the other filament for the stop and turn function.
2 answers

What does the back of this tail light look like. And does this come in 6 volt

rocketengine
January 15, 2013

What does the back of this tail light look like. And does this come in 6 volt

Answers

October 14, 2014
smilebigtt
the back of light is like a Model A light Flat with wires coming from the center.
January 15, 2013
Jason
The backside is flat with two mounting holes that are 1-3/4" center to center and the wires come out of the center of housing. We only offer this light in 12 volt
1 answers

What is the distance center to center on the mounting screws? Thanks

Magnolia, DE
January 05, 2012

What is the distance center to center on the mounting screws? Thanks

Answers

January 09, 2012
Jason
The mounting holes are 1-3/4" center to center. The lens mounting holes are 3-1/4" center to center
2 answers

Is the ring holding the lense as well as the case stainless steel? Can you tel me if the mounting holes in the tail light are the same as your P/N 911-27001 left?

Waller TX
January 10, 2011

Is the ring holding the lense as well as the case stainless steel? Can you tel me if the mounting holes in the tail light are the same as your P/N 911-27001 left?

Answers

October 14, 2014
smilebigtt
the lens has screws holding the lens. Not like the Model A or T
January 13, 2011
Ken
Yes, the retaining ring, case, and even the mounting studs are all made of stainless steel. The bolt spacing for this tail light and the 917-27001 are both 1.75”. If this clears up your concerns please contact us and we will be happy to process your order. If you need further input, please do not hesitate to contact us again.
Page 1 of 1

You may also be interested in:

Ford 1933-1936 Car/1945-1952 Pickup Tail Light Lens, Blue Dot
(Part #91062174)
                        

These replacement red glass tail light lens are for 1933-1936 Ford cars and 1945-1952 pickup trucks.  They are for the passenger side and feature the classic Lynx-Eye blue dot in the center.  Gives a bright lavender appearance when brake light comes on.

  • Original replacement
  • Red glass lens
  • Classic Lynx-Eye blue dot in center
  • 1933-1936 Ford cars and 1945-1952 pickups
  • Sold each
Super Brite Quartz Halogen Tail Lamp 1157 Bulbs
(Part #91131014)
                        Replaces 1157 - 12 V tail lamp bulbs. 

NOTE: Be Careful - Quartz Halogen bulbs emit substantial amounts of heat. Best if used with glass lenses and metal housings.

NEVER touch these bulbs with bare fingers! Smudges and skin oil will cause quick bulb failure. Wipe them with a cloth containing rubbing alcohol before use!

Halogen Tail Light Bulbs, 1157 Offset Mounting Pins
(Part #91131016)
                        

Those other super bright, super high powered tail light bulbs may be easy to see, but they also generate enough heat to discolor your lens and burn the paint.

Halogen tail light bulbs are brighter than standard bulbs, but use less energy, which means they burn cooler. 12 volt only.

This bulb is shorter than a 1157 bulb and measures only 1-3/4" from bottom to end of the tip. From the pin to tip is 1-1/2".



 

1933-36 Ford License Plate Bracket, Front
(Part #91130103)
                        

These front license plate mounting brackets are designed to fit 1933-1936 Ford passenger cars. This license tag bracket is available in black or polished stainless steel finishes.  Our brackets could be used on many applications. It will mount to any flat surface and has two mount holes at the base, approximately 2-1/8" center-to-center.

  • 1933-1936 Ford passenger cars
  • Mounts to original style bumper on passenger side or to any flat surface
  • Has two mount holes at the base, approximately 2-1/8" center-to-center
  • Available in black or polished stainless steel finishes
1933-1936 Ford LED Tail Light Assembly
(Part #91137028)
                        

Polished stainless steel housing with powerful red LED tail lights behind a glass lens. An excellent replacement or addition to your 1933-1936 Ford car. Also fits later model pick-ups and wagons. Choose right or left.

  • 19 Super Bright Red LEDs
  • Drivers side (Left side) includes a 5 LED White License Light
  • Polished stainless steel housing
  • Epoxy coated, fully sealed electronics
  • Solid state circuit board for 12V systems
1933-1936 LED Tail Light Installation Instructions (pdf)

 

Ford 1933-1936 Car/1945-1952 Pickup Tail Light Lens, Red Glass
(Part #91062181)
                        These reproduction red glass tail light lens are for 1933-1936 Ford cars  and 1945-1952 pickup trucks.  They feature specs of the originals. 
  • OEM replacement
  • Red glass lens
  • 1933-1936 Ford cars and 1945-1952 pickups
  • Sold each
1933-34 Ford Chrome Left Tail Light Bracket
(Part #91137009-L)
                        1933-1934 Ford tail light brackets. Chrome plated reproductions. Choose left or right. 

NOTE: Right hand has a hole for mounting a rumble step.