Unisteer 1933-34 Ford Cross-Steer Rack and Pinion
Click image to enlarge
Please note the following about this product:
- This item is sold as a kit.
Q & A (7)
What's in the Box
InfoThis is a great new concept for street rods with tubular or I-beam axles. It's hard to visualize how this works, but it's the hottest new idea out there!
Designed to replace the common Vega steering box, this rack and pinion assembly has a long passenger-side tie rod that hooks up to the right spindle like a Vega-style drag link. The rack unit is mounted on a sturdy bracket that bolts to your existing Vega box mount. The rack mounts much lower and farther forward than a box to provide more clearance, and those who have installed the system report quicker steering response and easier effort than a steering box.
The racks have 9/16" 26-spline shafts and the extension shafts are 5/8" 36-spline, just like a Vega box. Plus, our steering shaft extension 910-32244 allows you to reuse your existing steering U-joints and shafts when replacing your Vega box.
Specify 11/16" or 5/8" tie rod thread. The 5/8" is used with a LH heim joint, 11/16" is used with a LH tie rod end. Outer tie rod and jam nut not included.
If you are using heim ends, you may wish to order heim 175-0316 and jam nut 910-01056. If using tie rod ends, you may wish to order tie rod end 910-02919 and jam nut 910-01159.
910-32243 Instructions (PDF)
- 3.75 turns lock-to-lock
You may also be interested in:
Unisteer 1928-32 Ford Cross-Steer Rack and PinionView$369.99Compare