1932 Lo-Boy Hood Top & Sides
Click image to enlarge
Please NOTE the following about this product:
- This item is sold as a kit.
Q & A
What's in the Box
This product has no reviews.
No questions have been asked.
You may also be interested in:
Billet Car Hood PropMore InfoCompare
Self-Ejecting Quarter Turn Fasteners, .500 Inch Grip, Pack/10More InfoCompare
Stainless Steel Hood PropsMore InfoCompare
Budget Hinges, SteelMore InfoCompare
Lokar 0401024 6-Position Adjustable Hood Prop, PolishedMore InfoCompare
Speedway 1932 Lo-Boy Roadster Body Kit CarMore InfoCompare
Billet stops hold your hood up while doing service work. With a little imagination can be used for hinges also.
- Hinge measures 17-1/2" overall length from tip to tip at mount hole centers
- Center pivot to mount hole centers at end are 8.75"
Flush mounting, self-ejecting panel fasteners. Zinc plated steel with 5/16" shank. These 1/4 turn fasteners come in a package of 10.
Use .500" grip length for thin materials, .700" grip length for thicker materials.
Measurement Guide (Link)
With rubber coated short and long arms for 1928-1936 Ford and others. Polished, includes all hardware.
Our bare finish, cast steel 1-5/8" by 3-3/4" two tongue design hinges include nylon washers. Sold in pairs (enough to do one door). Ideally suited for Model T, or lighter-weight door applications.
Designed to be altered and drilled for various applications.
Constructed of high quality billet aluminum and stainless steel, this 6 position Adjustable-Level Hood and Trunk Prop will offer great looks as well as functionality to your ride. When the hood or trunk is raised, the Hood and Trunk Prop will automatically lock itself into position. This eliminates the need for two hands when opening your hood or trunk. A quick release allows the hood to be opened to its max for easy engine access. Each level of the six-level prop increases the opening of the hood or trunk by approximately 6 inches.
Level Spacing: 1-1/8"
491-40102 Instructions (PDF)
If you have ever wanted a 1932 Roadster but don't like the cramped cockpit, Speedway has the answer! We started with a clean slate and no expense was spared in the development of this classic street rod. By stretching the chassis and adding 2" to the length of the doors, you are able to get in and out of the car much easier. Also by moving the seat back 2", you have much more leg room and a smoother ride than an original 1932 Ford.
The Speedway Lo-Boy has been one of the most celebrated kit cars ever. Featured in Hot Rod Magazine, Street Rodder, and Rod & Custom Magazine, this car has recieved a great deal of publicity and acclaim. Correctly styled and authentically reproduced, the Lo-Boy Roadster revitalizes the hot rodding spirit that made the 1932 Ford a legend in America’s automotive history books. Designed for nostalgic originality, the Lo-Boy features a unique channeled look, which was quite popular in the early days of hot rodding.
The Lo-Boy body kit features a reinforced fiberglass 1932 Ford Roadster reproduction body, custom floor pan with transmission and driveshaft tunnel, passenger compartment bulkhead panel and trunk floor pan. It also includes functional doors with inner panels installed, as well as a deck lid with inner panel installed. Door jam structure braces, integral rear roll pan and rubber body mounting pads are also included.
The body sits upon our custom 106" wheelbase chassis (sold separately). It is a unique tubular design that channels the body over the frame rails for a nostalgic look.
This product is made to order so quantities may vary. Please allow six to eight weeks lead time.
Body Kit includes:
- Roadster body
- Floor pan
- Passenger compartment rear bulk head
- Trunk floor pan
- Dash panel (smooth)
- Doors w/ inner panels installed
- Deck lid w/ inner panel installed
- Door hinges & brackets (hidden)
- Slimline Bear Jaw door latches
- Door striker plates
- Deck lid hinges
- Deck lid latch assembly
- Rubber body mount pads
See more photos of the Lo-Boy here.