1932-34 Ford 4-Bar Tube Axle Kit for Ford Spindles, Plain

							                        

                                                        
Polished, chrome plated steel body shocks with 5/8" I.D. urethane bushings. Includes steel sleeves for use with 1/2" mounting hardware.
Note: Not for use with coil-over springs.
Pro Street Rod Shock Chart (GIF)

                                                    

						                        

							                        

                                                        
Apply Pro-Blend anti-seize directly to any metal surface that may gall or seize due to heat, pressure, torque loading or shock. Excellent in environments of gas, alcohol, water, solvents, dirt, sand, and grit.
Defies contact of dissimilar or like metals
Not affected by heat, moisture, salt water, or corrosion
                                                    

						                        

							                        

                                                        
Use with original or reproduction Model "T" thru '34 Ford crossmembers. Includes two U-bolts with nuts, one spacer plate and one lower bracket.
                                                    

						                        

							                        

                                                        
The Vega Manual Steering Box is the foundation of a cross steering system, which is the most popular steering system for modern Hot Rods. These boxes are compact, durable and are getting more scarce every day. 
This unit bolts up to all normal Vega-type brackets and accepts Vega-spline u-joints, pitman arms and accessories. Durable cast iron and machined steel construction will give years of high-mileage service.
New castings and components
Faithful reproduction of size, shape and mounting hole locations
No core charge
Cross Steering Guide (GIF)
910-32204 Instructions (PDF)
                                                    

						                        

							                        

                                                        
Speedway's exclusive steering & brake kits save you time and money by combining all necessary parts into one part number. Each kit includes brake kit, spindles, dust caps, spindle nuts, Rubber Brake Lines, AN3 caliper fittings, kingpins, flat steering arms, tie rod assembly and hardware.  
For 48" kingpin-to-kingpin axles
Traditional steering arm for left front wheel NOT included with Traditional steering kit
Available with 5x4.5" or 5x4.75" hubs
Spindle Identification Guide (GIF)
                                                    

						                        

							                        

                                                        Save yourself searching and confusion with these complete 1932-34 Ford front suspension kits. Each kit includes a 48" wide 4" drop I-beam axle, our famous urethane-bushed 21" long four bar assembly, perch bolts, lower shock mounts, spring shackles, Super Glide spring and the necessary brackets and hardware needed for assembly. 
Requires '37-'48 Ford passenger car spindles.
Each kit includes: 
48" kingpin-to-kingpin I-beam axle, 4" drop 
Urethane-bushed 21" long 4-bar assembly
Forged steel perch bolts
Forged steel lower shock mounts (key-slotted design)
Spring shackles w/ nylon bushings
31-1/4" eye-to-eye 4-leaf Super Glide cross spring 
All hardware for assembly 

                                                    

						                        

							                        

                                                        
Save yourself searching and confusion with these complete front suspension kits. Each kit includes a 48" wide, 3" drop tube axle, our famous urethane-bushed 21" long four bar assembly, perch bolts, lower shock mounts, spring shackles, Super Glide spring and the necessary brackets and hardware needed for assembly. (Spring and frame brackets are not stainless steel).  
Kit requires 1949-54 Chevy passenger car spindles.
Each kit includes: 
48" wide (kingpin-to-kingpin) steel tube axle, 3" drop
Urethane-bushed 21" long 4-bar assembly
Forged steel spring perch bolts
Forged steel lower shock mounts (key-slotted design)
Spring shackles w/ nylon bushings
31-1/4" eye-to-eye 4-leaf Super Glide spring, 1-3/4" wide
All hardware for assembly 
Front Axle/Suspension Tech Tips (GIF) 
                                                    

						                        

							                        

                                                        
Now you can dress up your '28-'48 Ford front axle with these chrome forged 4140 steel spindles. They come complete with bushings installed and '37-'41 style kingpins fitted. 
Superior strength compared to original spindles
Modeled after the '37-'41 round-back design
Uses '37-'41 Ford kingpins
For Ford axles '28-'48
Will not work with '28-'36 hubs
Complete with kingpin kit
Bushings fitted to pin and installed 
Don't forget to include our spindle nut kit (910616004) with these spindles. 
Note: Not to be used with disc brake kits 91031942 or 91631903 as these kits require modification to the spindle which is not recommended for chrome spindles. 
Spindle Identification Guide (GIF)
                                                    

						                        

							                        

                                                        
Speedway's exclusive steering & brake kits for 1937-48 Ford spindles save you time and money by combining all necessary parts into one part number. Each kit includes premuim Wilwood brake components, spindles, flat steering arms, tie rod assembly and hardware. Hubs are drilled for both 4-1/2" and 4-3/4" bolt patterns. Must be used with a 15" or larger wheel. For use on cars up to 2800 pounds with rear discs or on cars up to 2400 pounds with rear drums. Kits can be used with either manual or power boost master cylinders.
Features these Wilwood components:
4-piston Forged Billet Dynalite Calipers
10-3/4" diameter x .38" thick solid steel rotors - black finish
Lightweight clear-anodized aluminum hubs
Choose:
Traditional or cross steering
Chrome or plain steering arms and tie rod cross bar  
Traditional steering arm for left front wheel NOT included with kit. 
                                                    

						                        

							                        

                                                        Save yourself searching and confusion with these complete 1932-34 Ford front suspension kits. Each kit includes a 48" wide, 3" drop tube axle, our famous urethane-bushed 21" long four bar assembly, perch bolts, lower shock mounts, spring shackles, Super Glide spring and the necessary brackets and hardware needed for assembly. 
Requires '37-'48 Ford passenger car spindles.
Each kit includes:  
48" kingpin-to-kingpin tube axle, 3" drop 
Urethane-bushed 21" long 4-bar assembly
Forged steel perch bolts
Forged steel lower shock mounts (key-slotted design)
Spring shackles w/ nylon bushings
31-1/4" eye-to-eye 4-leaf Super Glide cross spring 
All hardware for assembly   
Front Axle/Suspension Tech Tips (GIF) 

                                                    

						                        

							                        

                                                        Save yourself searching and confusion with these complete 1932-34 Ford front suspension kits. Each kit includes a 48" wide, 3" drop tube axle, our famous urethane-bushed 21" long four bar assembly, perch bolts, lower shock mounts, spring shackles, Super Glide spring and the necessary brackets and hardware needed for assembly. 
Requires '37-'48 Ford passenger car spindles.
Each kit includes:  
48" kingpin-to-kingpin tube axle, 3" drop 
Urethane-bushed 21" long 4-bar assembly
Forged steel perch bolts
Forged steel lower shock mounts (key-slotted design)
Spring shackles w/ nylon bushings
31-1/4" eye-to-eye 4-leaf Super Glide cross spring 
All hardware for assembly   
Front Axle/Suspension Tech Tips (GIF) 

                                                    

						                        

							                        

                                                        Save yourself searching and confusion with these complete 1932-34 Ford front suspension kits. Each kit includes a 48" wide 4" drop I-beam axle, our famous urethane-bushed 21" long four bar assembly, perch bolts, lower shock mounts, spring shackles, Super Glide spring and the necessary brackets and hardware needed for assembly. 
Requires '37-'48 Ford passenger car spindles.
Each kit includes: 
48" kingpin-to-kingpin I-beam axle, 4" drop 
Urethane-bushed 21" long 4-bar assembly
Forged steel perch bolts
Forged steel lower shock mounts (key-slotted design)
Spring shackles w/ nylon bushings
31-1/4" eye-to-eye 4-leaf Super Glide cross spring 
All hardware for assembly