Products to Compare (max of 3)
X
Compare These Parts
America's Oldest Speed Shop ® Talk to the Experts. Call 800.979.0122, 7am-10pm, everyday.
Help Center
Help Center

U.S.Order Line:

800.979.0122

(CST) 7am - 10pm

Race and Rod Tech Support

Mon-Fri 8am - 5pm

Canadian Order Line:

855.313.9180

International Order Line:

1.402.323.3200
Since 1952
Menu
Shop By
Support
Account

1928-29 Ford Model A Locking Door Handles, Matched

Specs
Sold in Quantity:
Pair
Finish:
Chrome
Material Type:
Zinc
Overall Width:
4.00
Mounted Length:
2.13
Base Width:
2.00
Base Height:
1.13
1928-29 Ford Model A Locking Door Handles, Matched
1928-29 Ford Model A Locking Door Handles, Matched
1928-29 Ford Model A Locking Door Handles, Matched

Click image to enlarge

Please note the following about this product:

  • This item is sold as a pair.

Details

Reviews (1)

Q & A (6)

What's in the Box

Info

Conveniently packaged with matching Right and Left exterior door handles and keys. These locking exterior door handles will fit your 1928-29 Ford, Chevy, or Mopar car.  They feature a flat mount base and attach to the door with two screws.  These closed car outside handles come in a beautiful chrome plated finish.
  • 1928-1929 Closed Car Outside Locking Door Handles
  • locking with keys
  • flat mount
  • chrome plated finish
Note: Uses a 5/16" square shank which has a 3/8" long turned down O.D. of 1/4" which is 1/8" from the end of the shank.

Customer Reviews

Rated 5 out of 5 by 1 reviewers.
RATING BREAKDOWN
1 reviews
5 Stars
1
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0
RECOMMEND THIS PRODUCT:

cam
Verified Purchaser
Florida

1928 model A

November 21, 2016
Good product fit perfectly. Wick delivery
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Page 1 of 1

Product Q&A

6 questions : 6 answers

1 answers

Are both handles keyed alike as in any key will fit either handle 4 keys the same

vintage
Ohio
December 09, 2014

Are both handles keyed alike as in any key will fit either handle 4 keys the same

Answers

December 10, 2014
EricM
This pair of handles are keyed alike. If you require 4 door handles total (2 pairs) then you will need to specifically request that you would like both pairs of handle to be able to use one key.
1 answers

What is the conter to center of the mounting holes?

erw1
October 30, 2014

What is the conter to center of the mounting holes?

Answers

October 30, 2014
EricM
The mounting holes are 1.44" center to center.
1 answers

What is the length of the shank from the base of the mounting base to the end of the 5/16" shank ?

Newbie
Southern Illinois
May 21, 2015

What is the length of the shank from the base of the mounting base to the end of the 5/16" shank ?

Answers

May 21, 2015
Eric
Expert
These are 2 1/8" from the base to the end of the shank.
1 answers

Please confirm that these handles lock with both the handle and mounting plate in the HORIZONTAL position as shown in the photo. Thanks in advance.

Newbie
Southern Illinois
May 21, 2015

Please confirm that these handles lock with both the handle and mounting plate in the HORIZONTAL position as shown in the photo. Thanks in advance.

Answers

May 22, 2015
Zach
Expert
These are a replica of the Ford handle, and they may need to be mountd the same way a Ford handle is to function properly. They will be clocked 90 degrees off if you mount them the way a Plymouth requires. Most guys that have used these on other applications modify the doors to mount like a Ford.
1 answers

The description for these handles state that they will work with MoPar vehicles (ex. Plymouth sedan model 30U)in addition to the Fords. In order for this to be the case, the mounting base for the Plymouth needs to be in the HORIZONTAL position. Whereas, in the case of Fords it is in the VERTICAL position. In order to accommodate a hortizontal mounting base position, there would need to be additional indents in the interior annulus of the mounting plate to engage the locking tab that emerges from the handle axis when in the locked position. Please confirm that these handles have the necessary mounting plate indents to permit orienting the mounting plate in the horizontal position and maintaining the locking functionality. Thanks in advance.

Newbie
Southern Illinois
May 21, 2015

The description for these handles state that they will work with MoPar vehicles (ex. Plymouth sedan model 30U)in addition to the Fords. In order for this to be the case, the mounting base for the Plymouth needs to be in the HORIZONTAL position. Whereas, in the case of Fords it is in the VERTICAL position. In order to accommodate a hortizontal mounting base position, there would need to be additional indents in the interior annulus of the mounting plate to engage the locking tab that emerges from the handle axis when in the locked position. Please confirm that these handles have the necessary mounting plate indents to permit orienting the mounting plate in the horizontal position and maintaining the locking functionality. Thanks in advance.

Answers

May 22, 2015
Zach
Expert
They are a reproduction of the Ford handle, and in order to work on other models they may need to be mounted different than stock. We have not test fit them on a Plymouth but have been told they can be made to work.
1 answers

Does the mounting pad (part# 751B702356BS) fit snug to the base plate of this handle ? Thanks in advance

Newbie
Sounthern Illinois
May 23, 2015

Does the mounting pad (part# 751B702356BS) fit snug to the base plate of this handle ? Thanks in advance

Answers

May 26, 2015
Eric
Expert
Yes the mounting pads 751B702356BS fit the base plate of this handle.
Page 1 of 1

You may also be interested in:

  • 1928-1929 Closed Car Outside Locking Door Handles
    1928-1929 Closed Car Outside Locking Door Handles
    View
    (1)
    $39.99
    Compare
  • 1928-34 Ford Closed Car Outside Door Handle Pads
    1928-34 Ford Closed Car Outside Door Handle Pads
    View
    (2)
    $2.99
    Compare
Suggestions