Call: 800.979.0122
ALWAYS SECURE
America's Oldest Speed Shop ® 800.979.0122 Lincoln, NE
Filters
Menu
Help Center
Help Center
x
x
Help Center

sales@speedwaymotors.com

Contact
Help Center
x
x
How to Contact Us

U.S.Order Line:

800.979.0122

(CST) 7am - 10pm

Race and Rod Tech Support

Mon-Fri 8am - 5pm

Canadian Order Line:

855.313.9180

International Order Line:

1.402.323.3200
Since 1952
Menu
x

1928-29 Model A Aluminum Windshield Posts, 2 Inch Chopped

Free Shipping Free Shipping
Specs
Material Type:
Aluminum
Overall Length:
17.00
Sold in Quantity:
Pair
Finish:
Natural
Garage Sale:
No
Notes
Requires drilling. From where the lower hole would be drilled to the top of the swivel is 14.38" From the swivel hole to the top of the post is 2.00"
1928-29 Model A Aluminum Windshield Posts, 2 Inch Chopped

Click image to enlarge

Please NOTE the following about this product:

  • This item is sold as a pair.

Details

Reviews

Q & A

What's in the Box

These street rod/roadster 1928-29 Ford Model A windshield posts are a cast aluminum one-piece design. Length from end to windshield pivot stud hole is approximately 14-1/2". Length from end to end is approximately 16-3/4".
  • Cast aluminum.
  • Available in plain only
  • 2 Inch chopped
  • Drilling and fitment fabrication required
  • You polish and save!

Item Details

2" Chopped

Customer Reviews

Rated 4 out of 5 by 1 reviewers.
RATING BREAKDOWN
1 reviews
5 Stars
0
4 Stars
1
3 Stars
0
2 Stars
0
1 Star
0
RECOMMEND THIS PRODUCT:

Mike Britton
Verified Purchaser
Texas

Aluminum windshield posts

April 07, 2012
Worked OK for me as I have a 'glass body and have to make EVERYTHING fit. And, I'm going to paint mine to match the body. Too bad though they aren't offered polished and drilled for folks that want to have that "shiney" look.
Pros:
  • Durable
  • Easy To Use
  • Lightweight
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Page 1 of 1

Product Q&A

2 questions : 3 answers

1 answers

Rubber Is there rubber inserts in the posts?

Tedders
April 14, 2014

Rubber Is there rubber inserts in the posts?

Answers

April 15, 2014
EricM
These are bare cast aluminum that can be sanded and painted or sanded and polished. They do not have a rubber insert. We apologize for any inconvenience.
2 answers

what other parts are required? What other parts are required to have complete windshield ready for glass I am looking at 2in chopped with unpolished 2in chopped posts

lotusteve
Utah
April 29, 2013

what other parts are required? What other parts are required to have complete windshield ready for glass I am looking at 2in chopped with unpolished 2in chopped posts

Answers

May 09, 2013
BillB65
The posts require nothing more than to be srewed to the body. The windshield frame must be chopped 2" and be for a 28 or 29 body. You need two windshield mounting studs, stand off mounting cups, and two wing nuts. All of these items are sold by Speedway. I recommend their 2" chopped windshield frame and rubber seals. Everything went together great.
April 30, 2013
Jason
For a ready for glass windshield for your 28/29 you will need the posts as mentioned under number 91656281 and parts listed below. 55528021 frame and also available in chrome under 55528022. 91123102 studs times 2 91113110 swivel times 2 or also in brass or stainless 91123131 wingnut times 2 and also in brass 91123141 finger pull which is optional. Then the glass shop that cuts the glass should have the window welting or set tape to install the glass.
Page 1 of 1

You may also be interested in:

1928-29 Model A Roadster Windshield Frame, Plain Steel
(Part #55528001)
                        

Mr. Roadster '28-'29 Model A Roadster windshield frames feature one-piece constructon and have stock Ford dimensions.

Note: No glass or windshield rubber included with our windshield frames.

1928-29 Model A Roadster Windshield Frame, 2 Inch Chopped, Plain Steel
(Part #55528021)
                        

Mr. Roadster '28-'29 Model A Roadster Chopped windshield frames feature one-piece constructon and are chopped 2" for a more streamlined appearance.

Note: No glass or windshield rubber included with our windshield frames.

1928-1931 Model A Vicky Windshield Frame, Plain
(Part #55528401)
                        

Mr. Roadster Ford Model A windshields are made of extruded aluminum. Measures 14-5/8" tall, 45-3/8" wide at the top, and 44-1/2" wide at the bottom. These windshields have hinges at the top to allow them to open.

Fits the following '28-'31 Ford models:

  • Victoria
  • Cabriolet
  • Town and Convertible Sedans
  • Standard and Deluxe 4-door Briggs Body Sedan slant windshield


Note: No glass or windshield rubber included with our windshield frames.

1928-29 Polished Stainless Steel Chopped Windshield Posts
(Part #103A37138ACS)
                        				Die stamped stainless steel 1928-29 open car windshield posts. Polished.

1928-29 Chopped:
These posts are reproductions of the original design, only 2" shorter. They include 2 mounting holes per post. Length from end to windshield pivot stud hole is approximately 14-1/2". From end to end is approximately 16-3/4".