Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®


Titan Tools 11489 180 Degree Tubing Bender

Titan Tools 11489 180 Degree Tubing Bender

Click image to enlarge



Q & A

What's in the Box

  • Makes short, smooth radius bends up to 180 degrees
  • Calibration gauge to indicate angle of bend
  • For copper, aluminum and thin wall tubing
  • 3/8" maximum bending capacity
  • For 1/4", 5/16", 3/8" O.D. tubing

You may also be interested in:

Performance Tool W80675 Fuel Line Tubing Bender
(Part #91083300)
                        Our fuel line tubing benders will bend any 1/4", 5/16" or 3/8" tube up to 90 degrees.
Lever Tube Bender, 3/16 Inch Brake Line
(Part #91089527)
                        Lever type tubing bender features a 10" handle that gives plenty of  leverage to make smooth, professional, 5/8" radius bends in 3/16"  stainless or mild steel brake line tubing. The graduated scale of the  hard steel die permits accurate, repeatable bends time after time.
Titan Tools 11488 Tube Bending Pliers
(Part #72811488)
  • Bends copper, brass and other soft thin wall tubing
  • For 3/16", 1/4", 5/16" & 3/8" O.D. tubing
Titan Tools 51503 Mini Tubing Bender
(Part #72851503)
  • Bends 1/8, 3/16, and 1/4" tubing up to 90 degrees
  • Use with Brass, Copper, Steel, or Aluminum
  • Compact for limited accessibility applications
37 Degree Flaring Tool for Stainless Steel Line
(Part #91089524)

This is the best flaring tool for the money we have found. It has a feed screw with a hardened flaring cone eccentrically mounted in needle bearings which produces a rolling action for even metal flow. This provides uniform wall thickness without galling. It will put a 37 degree flare in 3/16”, 1/4”, 5/16”, 3/8”, ½”, 5/8” and 3/4” tubing. We recommend this tool when flaring 3/16” stainless steel brake line.

  • Provides smooth, uniform flares with minimum effort
  • Feed screw handle requires less motion and effort than standard handle
  • Flares steel, stainless steel, hard copper and brass thru wall thickness of .035"

Instructions (PDF)

Learn more about flaring lines for our automotive fittings by reading our tech article. The Principles of Automotive Fittings.

45 Degree Double Flaring Tool
(Part #91089525)

Use this handy tool to double flare mild steel brake lines just like the brake shop does. This tool makes 45° flares only. For 3/16", 1/4", 5/16", 3/8", 1/2" mild steel line only, NOT to be used with stainless steel line.  If using 37° AN fittings with stainless steel line, use 910-89524.

Learn more about flaring lines for our automotive fittings by reading our tech article. The Principles of Automotive Fittings