ALWAYS SECURE
America's Oldest Speed Shop ® 800.979.0122 Lincoln, NE
Filters
Menu
Contact
Help Center
x
x
How to Contact Us

U.S.Order Line:

800.979.0122

(CST) 7am - 10pm

Race and Rod Tech Support

Mon-Fri 8am - 5pm

Canadian Order Line:

855.313.9180

International Order Line:

1.402.323.3200
Since 1952
Menu
x

12 Inch Oval Chrome Air Cleaner

SAME DAY SHIPPING! Most orders ship within 24 hours.

Specs
Material Type:
Steel
Overall Height:
3.125
Overall Width:
8.000
Overall Length:
12.000
Sold in Quantity:
Each
Finish:
Chrome
Inside Diameter:
5.125
Garage Sale:
No
Notes
Includes 4-1/2" carb stud and wing nut.
12 Inch Oval Chrome Air Cleaner

Click image to enlarge

Details

Reviews

Q & A

What's in the Box

Just the ticket to top off your chromed out engine. Fits 5-1/8" carb necks which includes most 4 barrel Holley, Edelbrock, Demon, Q-jet and or Ford carbs (also fits Holley & Ford 2-bbl carbs with 5-1/8"neck).

Measures 12" long x 8" wide x 3-1/8" high with a 2" tall element. Includes carb stud and wing nut.

Customer Reviews

Rated 4.7 out of 5 by 7 reviewers.
RATING BREAKDOWN
7 reviews
5 Stars
5
4 Stars
2
3 Stars
0
2 Stars
0
1 Star
0
RECOMMEND THIS PRODUCT:

none
Verified Purchaser
Verified Reviewer
swanville me.

12 inch oval air filter looks great and the fit is very good

July 22, 2015
service is very good and delivery is exclent
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

JackRod
Verified Purchaser
Ohio, USA

Best Bang for the Buck

September 03, 2014
I returned a $124 ALU oval air cleaner and bought this nice Chrome one. Looks as good as the high dollar one for 1/4 of the cost. Save your money and get this one! Looks great on my 1936 Plymouth Coupe small block!!
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

321GO
Verified Purchaser

Almost perfect... But not quite...

August 28, 2014
*** Note - K&N E-3504 AND E-3505 Filters Fit This Assemby *** Ordered this unit specifically to allow basic adjustments on a Holley 4150 without removal of the air cleaner. Bought a 4in. tall E-3504 and the K&N fit better than the paper element supplied. Really like the way this assembly looks and the taller filter and appropriate hardware makes it even more stellar! Carb to base fit could stand to be tighter though. And I'd like to have seen better hardware than what was supplied... along with a carb to base gasket, which didn't come with the kit.
Pros:
  • raised base allows easier carb access
  • attractive oval design
  • chrome plating looks good
Cons:
  • base to carb fit is a little loose
  • no base to carb gasket included
  • stud and nut look like hardware store parts
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

SS 350
Kentucky

Good Air Cleaner

August 15, 2012
Decently priced and overall good quality. Bought this for my daily driver since it had very little room under the hood with an Edelbrock intake and GM HEI. A 14-inch round air cleaner would rub and pull the closest spark plug boot off and I couldn't get the timing perfect because the distributor would not let me put the air cleaner back on once it was just right. It is low enough profile and small enough to fit well under a hood if you don't want a gaudy cowl hood. It is a little on the smaller side but it's right for me.
Pros:
  • Well Fitting
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Mopar nut
Rockville, MD

Nice unit, reasonable price

July 25, 2012
I needed a low profile air cleaner that would clear an underhood brace on the stock power bulge hood on my 69 Dodge Coronet. After taking some measurements, this air cleaner looked like it would work. I'm glad to say that the air cleaner fit perfectly. My only criticism of the air cleaner is that the sheet metal seems a little bit thin, but you can't beat the price.
Pros:
  • Small Size
  • Low profile
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Brijoeal
Verified Purchaser
Lusby, MD

Nice and thin just what I needed.

December 22, 2011
Needed a thin air cleaner for the 351W swap into 1968 Cougar.
Pros:
  • Thin design
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Sir-x-Loin
Naples, ME

Nice piece

April 30, 2010
Quality piece, The chrome is nice and it sits flush on the carb. It is very low profile. I'd like to see some more options for air filter heights.[...]
Yes, I recommend this product.
Full Size Image

Was this review helpful? 0 0

Page 1 of 1

Product Q&A

6 questions : 8 answers

1 answers

Height details, also using on AC cobra 427 - holley 850 Is the height from the flange that sits on the carb to the centre or wing nut? If so what is the height to the outside edge of the air cleaner above the flange to the carb? Thanks

kodiak
BC
August 21, 2014

Height details, also using on AC cobra 427 - holley 850 Is the height from the flange that sits on the carb to the centre or wing nut? If so what is the height to the outside edge of the air cleaner above the flange to the carb? Thanks

Answers

August 22, 2014
EricM
The 3 1/8" height is measured from the carb flange to the top of the air cleaner in the center. The included wing nut is 3/8" tall so that makes it 3 1/2" tall to the top of the wing nut. The height from the carb flange to the top of the outer edge is 2 7/8"
1 answers

Will this work for a cobra 427 single quad

Pwh0747
July 10, 2014

Will this work for a cobra 427 single quad

Answers

July 11, 2014
EricM
This air cleaner will fit a single four barrel carburetor with a 5 1/8" air cleaner neck. It is 3 1/8" tall so you may want to check for hood clearance in your Cobra.
2 answers

What part number K&N air filter will fit this assembly?

Roddington
March 16, 2014

What part number K&N air filter will fit this assembly?

Answers

August 29, 2014
TRYIT
K&N part number E-3504 (4in.tall filter) and E-3505 (2in. tall filter) both fit in this air cleaner housing.
March 17, 2014
EricM
Sorry I am not aware of a K&N filter that is the correct size for this air cleaner assembly.
2 answers

Does it include the filter?

larry
shakopee, mn
July 07, 2011

Does it include the filter?

Answers

July 03, 2015
Eric
Expert
Yes, includes filter and housing
July 08, 2011
Jason
Yes, includes filter and housing
1 answers

How wide is the filter? It shows it's 12" long 2" high but not the width.

Jim
Rising sun, IN.
April 28, 2011

How wide is the filter? It shows it's 12" long 2" high but not the width.

Answers

April 29, 2011
Tech Support
The overall width is 8".
1 answers

Wanting to use this air cleaner on an Edelbrock 1902 Q-Jet carb. There is a small raised portion of the carb housing on passenger side of the carb. Will this air cleaner clear it?

pat50four
South Daytona, FL
June 17, 2015

Wanting to use this air cleaner on an Edelbrock 1902 Q-Jet carb. There is a small raised portion of the carb housing on passenger side of the carb. Will this air cleaner clear it?

Answers

June 18, 2015
Eric
Expert
Yes this air cleaner will fit your Edelbrock Quadrajet carburetor.
Page 1 of 1

You may also be interested in:

Tri-Bar Wing Nut for Air Cleaners, Black
(Part #5503426)
                        

These air cleaner wing nuts are just what you need to top-off that new air cleaner assembly. They are made to fit any steel or aluminum air cleaner assemblies.  Wing nut is approximately 5/8” tall with 1/4"-20 threads.  Wing nut will fit 5/16"-18 thread also.

Tri-Bar Wing Nut, Black

  • 5/8” tall
  • 1/4"-20 threads
  • chrome/steel
Ball Milled Billet Aluminum Oval Air Cleaner, 12 Inch
(Part #91011030)
                        

Theses highly polished aluminum air cleaners have the look of billet without the expense. This 12" Ball-Milled Air Cleaner is cast aluminum, approximately 1/4" thick, polished, and the grooves you see are actually ball-milled. Even the base is 1/4" cast aluminum and polished. Fits carburetors with 5-1/8" air horns.  Measures 12" long x 8-3/8" wide x 3" high.

  • Ball-Milled Air Cleaner
  • Highly polished cast aluminum
  • Fits carburetors with 5-1/8" air horns
  • 1/4" thick
  • 12" long x 8-3/8" wide x 3" high
Speedway Air Cleaner Base Gasket
(Part #91011101)
                        

Seals between air cleaner and standard 5-1/8" air horn. Prevents dirt from entering your engine. This reusable Speedway gasket has stainless steel ring embedded in durometer-tested neoprene rubber. Won't collapse, tear or lose its shape.

Speedway Illustration

Flamed Billet-Style Oval Air Cleaners
(Part #91011037)
                        

Theses highly polished aluminum air cleaners have the look of billet without the expense. Available with flame top.

Measures 3" high, 8-3/8" wide. Fits 5-1/8" single quad air horns.

12 Inch Oval Deep Full Finned Air Cleaner
(Part #9101123)
                        
  • 12" x 6.5"
  • Deep 2” fins
  • Polished
  • Paper filter and hardware included
  • Fits single quad carburetors with 5-1/8" neck
15 Inch Oval Deep Full Finned Air Cleaner
(Part #9101153)
                        
  • 15" x 8.5"
  • Deep 2” fins
  • Polished
  • Paper filter and hardware included
  • Fits single quad carburetors with 5-1/8" neck
12 Inch Oval Double Finned Air Cleaner
(Part #9106320)
                        
  • Polished aluminum top and base
  • Paper element & polished steel mounting stud included
  • Fits single quad carburetors with 5-1/8" neck
15 Inch Finned Mohawk Air Cleaner
(Part #9101152)
                        
  • 15" x 8.5"
  • Polished aluminum
  • Paper filter and hardware included
  • Fits single quad carburetors with 5-1/8" neck
Replacement Element for 12 Inch Oval Air Cleaner
(Part #91011012)
                        

Oval replacement paper element, 12" long x 2" high.