Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf

1 Inch Aluminum Open Carburetor Spacer

Specs
Material Type:
Aluminum
Sold in Quantity:
Each
Overall Thickness:
1.00
Finish:
Polished
Hole Diameter:
.37
Bolt Hole Pattern:
Inside: 5.61" x 4.26", Outside: 5.61" x 5.15"
Gasket(s) Included:
Yes
Hardware Included:
Yes
Inside Width:
3.40
Inside Length:
3.50
Notes
Will fit Holley, Demon, Edelbrock, Ford, and Carter AFB carbs.
1 Inch Aluminum Open Carburetor Spacer
1 Inch Aluminum Open Carburetor Spacer

Click image to enlarge

Details

Reviews

Q & A

What's in the Box

Carb spacers are a quick & easy way to improve the performance of your engine. Spacers lengthen the intake plenum increasing it's volume, and speeding up flow. This cast aluminum 1" tall open carb spacer has dual bolt patterns, so it will work with Holley, Demon, Edelbrock, Autolite, and Carter AFB carburetors. Includes two gaskets and hardware. 

  • Open center port
  • Universal 4 barrel carbs

You may also be interested in:

High Flow 4150 Holley Carb Spacer
(Part #1351958)
                        This hi-tech carb spacer straightens out and increases air velocity into the intake manifold.
  • 1" thick and standard 4150 bolt pattern
  • Fits 4 barrel 4150 Holley carburetors
Plastic Open Carburetor Spacer, 1 Inch
(Part #54564940)
                        These open center carburetor spacers are designed to fit Holley 4150/4160 bolt pattern 4 barrel carbs. They are IMCA approved and are made to reduce heat conductivity for optimum performance.
  • Plastic spacer reduces heat conductivity 10 times greater than aluminum
  • Results in a denser, more powerful fuel charge to the manifold
  • Fits Holley 4150/4160 bolt pattern
  • IMCA approved
  • Includes studs, nuts & washers (gaskets not included)
Percy's 66021 Seal-4-Good Reusable Base Plate Gasket
(Part #91011105)
                        Advanced EMR polymer insures reusability. Will not stick like ordinary paper gaskets. Allows quicker carburetor removal and replacement.  Gasket is 0.0640" thick.
                    
Gaerte Engines CRB 2500 Carburetor Spacer, 1 Inch
(Part #3912500)
                        Wouldn't you think a guy that builds engines and racing carbs for a living might have carb spacers figured out? Bolt-on one of these spacers and feel the power. 
                    
R2C CS10500 Track Control Carburetor Spacer, 1.25 Inch Bore
(Part #5921050)
                        

When you get beat out of corners on slick tracks, it may not be the skill of the other driver that's doing that to you!  Many of these teams are now relying on Track Control spacers from R2C for a smooth application of power.

For the days when getting a grip on a dicey track presents problems for even the best Late Model and Modified teams, R2C Track-Control carburetor spacers help solve the problem by applying smooth and consistent power to get you to the front. Take the edge off when driving out of corners and plant the power rather than blowing the tires off!

Holley 4150 4 barrel Track-Control spacers are designed to limit power production and control torque by reducing bore size from 1.75" to 1.25". In Dirt Modified testing, Track-Control spacers provide a power reduction of 50-60 HP with a corresponding reduction in torque on 675-700 HP engines. Track-Control carburetor spacers are 1" tall and designed to maintain perfect A/F quality and booster signal. The venturi shaped profile also helps control reversion while the phenolic construction provides outstanding strength and helps control carburetor temperatures.

  • 1 Inch Thick
  • 4-Hole Holley design
  • Designed to limit power production and control torque by reducing bore size from 1.75" to 1.25"
  • Provides a power reduction of 50-60 HP with a corresponding reduction in torque on 675-700 HP engines
R2C CS10503 Track Control Carburetor Spacer, 1.125 Inch Bore
(Part #5921053)
                        When you get beat out of corners on slick tracks,  it may not be the skill of the other driver that's doing that to you!   Many of these teams are now relying on Track Control spacers from R2C  for a smooth application of power.

For the days when getting a grip on a dicey track presents problems for even the best Late Model and Modified teams, R2C Track-Control carburetor spacers help solve the problem by applying smooth and consistent power to get you to the front. Take the edge off when driving out of corners and plant the power rather than blowing the tires off!

Holley 4150 Track-Control spacers are designed to limit power production and control torque by reducing bore size from 1.75" to 1.125". Track-Control
4 barrel carburetor spacers are 1" tall and designed to maintain perfect A/F quality and booster signal. The venturi shaped profile also helps control reversion while the phenolic construction provides outstanding strength and helps control carburetor temperatures.
  • 1 Inch Thick
  • 4-Hole Holley design
  • Designed to limit power production and control torque by reducing bore size from 1.75" to 1.125"
R2C CS10501 Track Control Carburetor Spacer, 1.000 Inch Bore
(Part #5921051)
                        These Track-Control  spacers are designed to limit power  production and control torque by  reducing bore size from 1.75" to  1.000". Track-Control 4 barrel carburetor  spacers are 1"  tall and designed to maintain perfect A/F quality and  booster signal.  The venturi shaped profile also helps control reversion  while the  phenolic construction provides outstanding strength and helps  control  carburetor temperatures.
  • 1 Inch Thick
  • 4-Hole Holley design
  • Designed to limit power production and control torque by reducing bore size from 1.75" to 1.000"